❏ Document Capture Pro (Windows)/Document Capture (Mac OS)
It is installed on the client computer. e jobs registered on a network computer where Document Capture Pro/
Document Capture is installed can be called and run from the deivce's control panel.
You can scan over the network from a computer. Epson Scan 2 is required to scan.
Related Information
& “EpsonNet SetupManager” on page 122
Conrming that Network Scan is Enabled
You can set the network scan service when you scan from a client computer over the network. e default setting is
enabled.
1. Access Web Cong and select the Scan/Copy tab > Network Scan.
2.
Make sure that Enable scanning of EPSON Scan is selected.
If it is selected, this task is completed. Close Web Cong.
If it is cleared, select it and go to next step.
3. Click Next.
4. Click OK.
e network is re-connected, and then the settings are enabled.
Related Information
& “Accessing Web Cong” on page 28
Scanning using the control panel
e scan to folder function and the scan to mail function using the printer’s control panel, as well as the transfer of
scan results to mail, folders, etc. are performed by executing a job from the computer.
Related Information
&
“Settings of Servers and Folders” on page 72
Administrator's Guide
Function Settings
71
