Note:
You can also set up from the printer’s control panel.
❏ Language : Settings > General Settings > Basic Settings > Language
❏ Panel Lock : Settings > General Settings > System Administration > Security Settings > Admin Settings > Lock
Setting
❏ Operation Time Out : Settings > General Settings > Basic Settings > Operation Time Out (You can specify On or
O.)
3. Click OK.
Related Information
&
“Accessing Web
Cong
” on page 27
Power Saving Settings During Inactivity
You can set up the time to shi to the power saving mode or to turn the power o when the printer’s control panel
is not operated for a certain period of time. Set the time depending on your usage environment.
1. Access Web Cong and select the Device Management tab > Power Saving.
2.
Enter the time for the Sleep Timer to switch to power saving mode when inactivity occurs.
You can set up to 240 minutes by the minute.
Note:
You can also set up from the printer’s control panel.
Settings > General Settings > Basic Settings > Sleep Timer
3. Select the turning o time for the Power O Timer.
Note:
You can also set up from the printer’s control panel.
Settings > General Settings > Basic Settings > Power
O
Tim e r
4. Click OK.
Related Information
& “Accessing Web Cong” on page 27
Synchronizing the Date and Time with Time Server
When synchronizing with the time server (NTP server), you can synchronize the time of the printer and the
computer on the network.
e
time server may be operated within the organization or published on the Internet.
When using the CA certicate or Kerberos authentication, time-related trouble can be prevented by synchronizing
with the time server.
1. Access Web Cong and select the Device Management tab > Date and Time > Time Ser ver.
2.
Select Use for Use Time Server.
Administrator's Guide
Function Settings
42
