❏ Wi d t h
Set the horizontal length of the user-dened size.
e
range you can enter here depends on the paper source, which is indicated on the side of Wi d t h .
When you select mm in Unit, you can enter up to one decimal place.
When you select inch in Unit, you can enter up to two decimal places.
❏ Height
Set the vertical length of the user-dened size.
e range you can enter here depends on the paper source, which is indicated on the side of Height.
When you select mm in Unit, you can enter up to one decimal place.
When you select inch in Unit, you can enter up to two decimal places.
❏ Paper Type
Select the paper type you want to set from the pull-down menu.
3. Check the settings, and then click OK.
Related Information
& “Accessing Web
Cong
” on page 27
Interface Settings
Set the timeout of the print jobs or printing language assigned to each interface.
is item is displayed on the PCL or PostScript compatible printer.
1. Access Web
Cong
and select the Print tab > Interface Settings.
2. Set each item.
❏ Timeout Settings
Set the timeout of the print jobs sent directly via USB.
You can set between 5 and 300 seconds by the second.
When you do not want to timeout, enter 0.
❏ Printing Language
Select the printing language for each USB interface and network interface.
When you select Auto, the printing language is automatically detected by the print jobs being sent.
3.
Check the settings, and then click OK.
Related Information
& “Accessing Web Cong” on page 27
Error Settings
Set the displaying error for the device.
1. Access Web
Cong
and select the Print tab > Error Settings.
Administrator's Guide
Function Settings
34
