605828
75
Zoom out
Zoom in
Previous page
1/117
Next page
Transporting the Product
If you move the product some distance, you need to prepare it for transportation in its original box or one of a similar
size.
c
Important:
When storing or transporting the product, avoid tilting it, placing it vertically, or turning it upside down;
otherwise ink may leak.
When storing or transporting the ink bottle after opening the sealed bottle, avoid temperature changes, impacts,
shaking or tilting the bottle; otherwise ink may leak even if you tighten the cap on the bottle. Be sure to keep the ink
bottle upright when tightening the cap, and take measures to prevent ink from leaking when you transport the
bottle.
A
Remove all paper from the rear paper feed and make sure the product is off.
B
Close the paper support and the output tray.
C
Open the scanner unit and make sure the print head is in the home position on the right.
Note:
If the print head is not in the home position on the right, turn on the product and wait until the print head locks in the
far right position. Then turn off the product.
D
Unplug the power cord from the outlet, then disconnect all cables from the product.
User’s Guide
Maintaining Your Product and Software
75
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson Workforce M200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson Workforce M200 in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info