605828

Epson Workforce M200 Manual

62
Zoom out
Zoom in
Previous page
1/117
Next page
❏ After bringing an ink bottle inside from a cold storage site, allow it to warm up at room temperature for at least
three hours before using it.
❏ Store ink bottles in a cool, dark place.
❏ Store the ink bottles in the same environment as the product. When storing or transporting the ink bottle after
opening the sealed bottle, avoid temperature changes, impacts, shaking or tilting the bottle; otherwise ink may
leak even if you tighten the cap on the bottle. Be sure to keep the ink bottle upright when tightening the cap, and
take measures to prevent ink from leaking when you transport the bottle.
Ink bottle specifications
❏ Epson recommends using the ink bottle before the date printed on the package.
❏ Some ink is consumed in the initial charging. In order to produce high quality printouts, the print head in your
product will be fully charged with ink.
❏ Quoted yields may vary depending on the images that you are printing, the paper type that you are using, the
frequency of your prints and environmental conditions such as temperature.
❏ Although the ink bottles may contain recycled materials, this does not affect product function or performance.
Checking the Ink Level
To confirm the actual ink remaining, visually check the ink level in the product’s ink tank.
c
Important:
If the ink level is below the lower limit on the ink tank, fill it to the upper line on the ink tank. Continued use of the
product when the ink level is below the lower limit on the tank could damage the product.
Refilling the Ink Tank
Ink can be refilled at any time.
A
Open the ink tank unit cover, and then remove the cap of the ink tank. After removing the cap, place it as shown
in the illustration below.
User’s Guide
Refilling Ink
62
… 62 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson Workforce M200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson Workforce M200 in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info