682252
55
Zoom out
Zoom in
Previous page
1/92
Next page
Note:
Connection fails when the
light turns on.
Aer
releasing the error by pressing the button, restart the access point,
move it closer to the scanner, and then try again.
Related Information
&
“Basic Scanning” on page 25
&
“Advanced Scanning” on page 35
&
“Network Problems” on page 74
Making Wi-Fi Settings by PIN Code Setup (WPS)
You can automatically connect to an access point by using a PIN code. You can use this method to set up if an
access point is capable of WPS (Wi-Fi Protected Setup). Use a computer to enter a PIN code into the access point.
1. Press the
button and the button on the scanner’s control panel simultaneously until light ashes
in blue (approximately 3 seconds).
2. Use your computer to enter the PIN code (an eight-digit number) on the label stuck to the scanner into the
access point within two minutes.
e connection setting starts. e
light and light ash alternately.
e
is lit blue when connection is complete.
Note:
See the manual provided with your access point for details on entering a PIN code.
Connection fails when the
light turns on. Aer releasing the error by pressing the button, restart the access
point, move it closer to the scanner, and then try again.
Related Information
& “Basic Scanning” on page 25
& “Advanced Scanning” on page 35
& “Network Problems” on page 74
Making AP Mode Settings
is method allows you to connect the scanner directly to devices without an access point. e scanner acts as an
access point.
c
Important:
When you connect from a smart device to the scanner using the AP mode connection, the scanner is connected to
the same Wi-Fi network (SSID) as the smart device and communication is established between them. Since the
smart device is automatically connected to other connectable Wi-Fi networks if the scanner is turned
o,
it is not
connected to the previous Wi-Fi network again if the scanner is turned on. Connect to the scanner’s SSID in AP
mode from the smart device again. If you do not want to connect every time you turn the scanner on or o, we
recommend using a Wi-Fi network by connecting the scanner to an access point.
User's Guide
Network Settings
55
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson WORKFORCE DS-1660W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson WORKFORCE DS-1660W in the language / languages: English as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson WORKFORCE DS-1660W

Epson WORKFORCE DS-1660W User Manual - German - 96 pages

Epson WORKFORCE DS-1660W User Manual - Dutch - 95 pages

Epson WORKFORCE DS-1660W Quick start guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info