617865

Epson WORKFORCE AL-MX300 Manual

248
Zoom out
Zoom in
Previous page
1/287
Next page
❏ Check if the Receive Mode is set to Auto. If the Receive Mode is set to Manual, the printer never
answers calls. Answer the phone and start receiving the fax yourself. See “Reception Settings” on
page 157.
❏ Make sure the printer is connected properly to a phone line.
❏ Check if there are too many devices connected to the phone line. Try removing the last device
connected and see if the printer works. If not, continue removing devices one at a time and retry
after removing each one.
❏ Make sure the phone line is working. Try one of the followings.
Turn up the speaker volume on the printer and press the Start button on the control panel. If you
hear a dial tone, the phone line is working. Disconnect the printer from the phone jack and
connect a phone. Try to make a phone call to make sure the phone line is working.
❏ Check if the printer is out of paper. If the printer is out of paper and its memory is full, it will not be
able to receive faxes. Refill paper in the MP tray or the paper cassette. The printer will print all of
the faxes it has saved in memory and will then resume answering fax calls.
Faxes are transmitting or being received very slowly
Try one or more of the following solutions.
❏ Check if you are sending or receiving a very complex fax. A complex fax, such as one with many
graphics, takes longer to be sent or received.
❏ Check if the receiving fax machine has a slow modem speed. The printer only sends the fax at the
fastest modem speed the receiving fax machine can use.
❏ Check if the resolution at which the fax was sent or received is very high. A higher resolution
typically results in better quality, but also requires a longer transmission time. If you are receiving
the fax, call and ask the sender to lower the resolution and resend the fax. If you are sending, lower
the resolution and resend the fax.
❏ Check if there is a poor phone line connection. If there is a poor phone line connection, the printer
and the receiving fax machine slow down line transmission to adjust for errors. Hang up and
resend the fax. If this does not work, have the phone company check the phone line.
Quality problems occur
Check if Image Quality Selection and Fax Density Selection under the Basic Setting
tab are specified correctly.
AL-MX300 Series User's Guide
Troubleshooting 248
… 248 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson WORKFORCE AL-MX300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson WORKFORCE AL-MX300 in the language / languages: English as an attachment in your email.

The manual is 4,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson WORKFORCE AL-MX300

Epson WORKFORCE AL-MX300 User Manual - German - 311 pages

Epson WORKFORCE AL-MX300 User Manual - Dutch - 307 pages

Epson WORKFORCE AL-MX300 Installation Guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info