771867

Epson WF-2850 series WorkForce Manual

84
Zoom out
Zoom in
Previous page
1/234
Next page
Selecting Check Fax Connection checks that the printer is connected to the phone line and ready for fax
transmission. You can print the check result on A4 size plain paper.
Fax Setting Wizard
You can nd the menu on the printer's control panel below:
Settings > General Settings > Fax Settings > Fax Setting Wizard
Selecting Fax Setting Wizard makes basic fax settings. Follow the on-screen instructions.
Related Information
&“Making the Printer Ready to Send and Receive Faxes (Using Fax Setting Wizard)” on page 77
Basic Settings Menu
You c a n nd the menu on the printer's control panel below:
Settings > General Settings > Fax Settings > Basic Settings
Item Description
Fax Speed Select the fax transmission speed. We recommend selecting Slow(9,600bps) when a
communication error occurs frequently, when sending/receiving a fax to/from abroad, or when
you are using an IP (VoIP) phone service.
ECM Automatically corrects errors in the fax transmission (Error Correction Mode), mostly caused by
telephone line noise. If this is disabled, you cannot send or receive documents in color.
Dial Tone Detection Detects a dial tone before starting to dial. If the printer is connected to a PBX (Private Branch
Exchange) or digital phone line, the printer may fail to start dialing. In this situation, change the
Line Type setting to PBX. If this does not work, disable this feature. However, disabling this
feature may drop the rst digit of a fax number and send the fax to the wrong number.
Dial Mode Select the type of phone system to which you have connected the printer. When set to Pulse,
you can temporarily switch the dialing mode from pulse to tone by pressing ("T" is entered)
while entering numbers on the fax top screen. This setting may not be displayed depending on
your region or country.
Line Type Select the line type to which you have connected the printer.
When using the printer in an environment that uses extensions and requires an external access
code, such as 0 and 9, to get an outside line, select PBX and register the access code. Once you
have registered the access code, enter # (hash) instead of the access code when sending a fax to
an outside fax number. For an environment that uses a DSL modem or terminal adapter, setting
to PBX is also recommended.
You cannot send faxes to recipients in Contacts in which an external access code such as 0 or 9
is set. If you have added recipients in Contacts using an external access code such as 0 or 9, set
the Access Code to Do Not Use. Otherwise, you must change the code to # in Contacts.
Header Enter your sender name and fax number. These appear as a header on outgoing faxes.
❏Your Phone Number: You can enter up to 20 characters using 0-9 + or space.
❏Fax Header: You can register up to 21 sender names as necessary. You can enter up to 40
characters for each sender name.
Receive Mode Select the receive mode. For details, see the related Information below.
User's Guide
Fax Settings
84
… 84 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson WF-2850 series WorkForce at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson WF-2850 series WorkForce in the language / languages: English as an attachment in your email.

The manual is 5.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson WF-2850 series WorkForce

Epson WF-2850 series WorkForce User Manual - German - 245 pages

Epson WF-2850 series WorkForce User Manual - Dutch - 240 pages

Epson WF-2850 series WorkForce User Manual - French - 243 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info