512691
17
Zoom out
Zoom in
Previous page
1/96
Next page
TM-J7000/J7100 – TM-J7500/J7600 User’s Manual 9
English
Cleaning
If printing becomes faint or uneven and the INK LED is not on or flashing, press
the CLEANING button until the printer mechanism begins to clean the print head
(more than 3 seconds). The POWER LED flashes during cleaning. When the
cleaning stops, the printer is ready for normal printing.
Note:
Do not use the CLEANING button unless there is a problem with print quality.
Unnecessary cleaning will waste ink.
Do not turn off the power or open any covers while the POWER LED is flashing. If you
turn off the power during cleaning and turn on the printer again, a noise will occur due to
a carriage movement, but this is not a problem with the mechanism. Please be sure to wait
until the cleaning is complete (the POWER LED is off.)
Message for Replacing Mechanical Unit
The following message will be printed every time the printer is turned on when
the pump unit is near the end of its life. Please follow the instructions in the
message.
Caution: The pump unit must be replaced.
Contact a qualified service person.
Troubleshooting
ERROR LED is flashing or lit
The print head temperature may be high or low. Wait until the print head cools
or warms and the printer resumes printing automatically.
Make sure that the printer cover is properly closed.
If a paper jam has occurred, open the roll paper cover or the ink cartridge cover
and remove the jammed paper. Do not pull the jammed paper by force or use
tools. Be sure to remove it manually.
Turn off the power, wait several seconds, and then turn it on again. If the error
remains, contact your supervisor or a qualified service person.
Transporting
To transport this printer, follow these steps:
1. Remove the roll paper and ink cartridge.
2. Turn off the power supply.
3. Check that the POWER LED is off.
4. Remove the power supply connector and other connectors.
Keep the printer upright and horizontal while you pack it and during
transporting.
Be sure not to ship the ink cartridge that has been removed from the packing.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson TM-J7100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson TM-J7100 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info