Follow the instructions in the control panel to perform the initial ink charging. First, wash the head
(charge with cleaning liquid and then discharge), then charge the head with ink. After charging the
head with cleaning liquid, remove the cleaning cartridges, discharge the cleaning liquid, and then
install the ink cartridges. See the following page for information on installing and removing ink
cartridges.
When the ink charging is completed, Load Media is displayed on the screen.
Suivez les instructions sur l’écran du panneau de commande pour effectuer le chargement initial en
encre. Nettoyez d’abord la tête (chargez puis libérez le liquide de nettoyage),puis chargez la tête en
encre. Après avoir chargé la tête avec le liquide de nettoyage, retirez les cartouches de nettoyage,
libérez le liquide de nettoyage puis installez les cartouches d’encre. Reportez-vous à la page suivante
pour plus d’informations sur l’installation et le retrait des cartouches d’encre.
Lorsque le chargement en encre est terminé, Charger le support s’affiche sur l’écran.
Folgen Sie den Anweisungen auf dem Bildschirm des Kontrollpanel um die initiale Tintenfüllung
durchzuführen. Waschen Sie zuerst den Kopf (Ladung und Entladung der Reinigungsflüssigkeit), und
laden Sie ihn dann mit Tinte. Entfernen Sie, nachdem der Kopf mit Reinigungsflüssigkeit geladen
wurde, die Reinigungspatronen, führen Sie die Reinigungsflüssigkeit ab und installieren Sie dann
die Tintenpatronen. Auf der folgenden Seite finden Sie Informationen über das Einsetzen und die
Entfernung von Tintenpatronen.
Wenn die Tintenfüllung abgeschlossen ist, wird Load Media auf dem Bildschirm angezeigt.
Volg de instructies op het bedieningspaneel om de eerste keer inkt bijvullen uit te voeren. Was eerst
de kop (vul reinigingsvloeistof bij en leeg die dan), en vul de kop vervolgens met inkt. Verwijder
na het vullen van de reinigingsvloeistof de reinigingscartridges, leeg de reinigingsvloeistof en
installeer vervolgens de inktcartridges. Raadpleeg de volgende pagina voor meer informatie over het
installeren en verwijderen van inktcartridges.
Zodra het bijvullen van de inkt is voltooid, wordt Media invoeren op het scherm weergegeven.
Ink Charging
Chargement en encre
Tintenfüllung
Inkt bijvullen
Ricaricare l’inchiostro
Carga de tinta
Carregamento de tinta
ENInitial Ink ChargingITRicarica di inchiostro inizialeESCarga inicial de tintaFRChargement initial en encreDEInitiale TintenfüllungPTCarregamento Inicial de TintaNLEerste keer inkt bijvullen
Seguire le istruzioni nel pannello di controllo per effettuare la carica iniziale di inchiostro. Lavare
prima la testina (caricare con il liquido per la pulizia e poi scaricare), quindi caricarla con l’inchiostro.
Dopo aver caricato la testina con il liquido per la pulizia, rimuovere le cartucce di pulizia, svuotarle
dal liquido per la pulizia, quindi inserire le cartucce d’inchiostro. Vedere la pagina seguente per
informazioni sull’installazione e la rimozione delle cartucce d’inchiostro.
Quando la carica dell’inchiostro è completa, sullo schermo appare Caricare il supporto.
Siga las instrucciones indicadas en el panel de control para realizar la carga de tinta inicial. Primero,
limpie el cabezal (cargue y descargue el líquido de limpieza) y, a continuación, cargue la tinta. Tras
cargar el cabezal con líquido de limpieza, extraiga los cartuchos de limpieza, descargue el líquido de
limpieza, y, a continuación, instale los cartuchos de tinta. Consulte la página siguiente para obtener
información a cerca de la instalación o extracción los cartuchos de tinta.
Una vez completada la carga de tinta, Load Media (cargar materiales) será visualizado en la pantalla.
Siga as instruções no ecrã do painel de controlo para realizar o carregamento inicial de tinta. Primeiro
limpe a cabeça (carregue com líquido de limpeza e depois descarregue) e depois carregue a cabeça
com tinta. Depois de carregar a cabeça com líquido de limpeza, remova os tinteiros de limpeza,
descarregue o líquido de limpeza e depois instale os cartuchos de tinta. Veja na página seguinte as
informações sobre instalação e remoção de cartuchos de tinta.
Quando o cartucho de tinta estiver completo, Carregar Papel é apresentado no ecrã.
c
If you selected 8 or 4 color mode, use the supplied replacement cartridges to fill all slots.
Si vous avez sélectionné le mode 8 ou 4 couleurs, utilisez les cartouches de rechange fournies pour remplir tous les espaces.
Falls Sie den Acht- oder Vierfarbmodus gewählt haben, benutzen Sie die mitgelieferten Ersatzpatronen um alle Steckplätze zu
füllen.
Als u de 8 of 4 kleurenmodus selecteerde, moet u de meegeleverde vervangings cartridges gebruiken om alle sleuven te
vullen.
Se si è selezionato il modo a 8 o 4 colori, utilizzare le cartucce di ricambio in dotazione per riempire tutti gli alloggiamenti.
Si selecciona el modo de color 8 o 4, utilice los cartuchos de sustitución suministrados para llenar todas las ranuras.
Se escolher o modo de cor 8 ou 4, utilize os tinteiros de substituição fornecidos para preencher todos os espaços.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Epson SureColor SC-S70610 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Epson SureColor SC-S70610 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.
The manual is 4,91 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
