617690
101
Zoom out
Zoom in
Previous page
1/124
Next page
The print is not positioned properly
on the media.
o
Is the media loaded correctly and are the
margins correct?
If the media is not loaded correctly, the results may be
off center or part of the data may not be printed. You
should also check whether the correct options are
selected for Side Margin and Print Start Position in
the setup menu.
U “Loading media” on page 24
U “The Printer Setup Menu” on page 90
o
Is the media skewed?
If OFF is selected for Media Skew Check in the setup
menu, printing will continue when the media is
skewed and data will appear outside the print area.
Set Media Skew Check to ON in the Menu.
U “The Printer Setup Menu” on page 90
o
Is the media wide enough for the print data?
Although printing normally stops if the print image is
wider than the media, data will be printed beyond the
edges of the media if OFF is selected for Media Size
Check in the setup menu. Choose ON for Media Size
Check in the setup menu.
U “The Printer Setup Menu” on page 90
Vertical ruled lines are misaligned.
o
Is the media wavy?
Certain types of media may develop waves under
some conditions (humidity and temperature) while
installed in the printer. If a wave has developed, press
the d button in the control panel to feed the media
and avoid the affected area. We recommend that you
lower the temperature and humidity to prevent
waves developing.
o
Is the print head misaligned?
If the print head is misaligned, ruled lines may be
misaligned accordingly. In this case, select Media
Adjust - Head Alignment in the media settings to
adjust a print head misalignment that occurs during
printing.
U “Head Alignment” on page 45
Media
Media Jams.
o
Is media curled, folded, curved, creased, or
waved?
Cut and remove the curled, folded, curved, creased, or
waved part.
U “Cutting Media” on page 40
o
Is media loaded just before printing?
The pressure rollers may crease media left in the
printer, or the media may also become wavy or curled.
o
Is the media too thick or too thin?
Check the media specifications to determine
whether it can be used in the printer.
U “Supported Media” on page 106
For information on how to configure print
settings using the software RIP, contact the RIP
manufacturer.
Printing does not stop when the roll
ends.
o
Is the item for having the printer detect the
end of the media set to OFF?
When Media End Check is set to OFF from the Printer
Setup menu, the end of the media is not detected.
U “The Printer Setup Menu” on page 90
Removing Jammed Media.
Follow the steps below to remove jammed media.
Caution:
Be careful not to trap your hands or fingers when
opening or closing the front cover. Failure to observe
this precaution could result in injury.
A
Turn off the printer.
If a message is displayed and the printer will not
turn off, unplug both power cables.
SC-S60600 Series/SC-S40600 Series User's Guide
Problem Solver
101
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SureColor SC-S60600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SureColor SC-S60600 in the language / languages: English as an attachment in your email.

The manual is 9,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SureColor SC-S60600

Epson SureColor SC-S60600 Installation Guide - English, German - 32 pages

Epson SureColor SC-S60600 User Manual - German - 134 pages

Epson SureColor SC-S60600 Installation Guide - Dutch - 32 pages

Epson SureColor SC-S60600 User Manual - Dutch - 133 pages

Epson SureColor SC-S60600 Installation Guide - French, Italian, Portuguese, Spanish - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info