617685
147
Zoom out
Zoom in
Previous page
1/198
Next page
Item Parameter Explanation
Media Adjust
Select this option to adjust media with Auto Media Adjust disabled or
make readjustment when changing printing conditions after saving
media settings.
In this menu, perform Feed Adjustment and Head Alignment
individually.
Adjustment types and execution procedure U “Media Adjust” on
page 86
Feed Adjustment
Auto Print
Manual Print
Head Alignment
Standard
(Auto)
Print
Standard
(Manual)
Print
Block pattern Manual(Uni-D)
Manual(Bi-D)
Manual(Dual Head)
*1
Heating & Drying
Heater Tempera-
ture
Pre-heater/platen
heater: 30˚C to 50˚C
(86˚F to 122˚F)
After heater: 30˚C to
55˚C (86˚F to 131˚F)
The temperatures for the pre-, platen, and after heaters can each be
adjusted separately.
Drying Time Per
Pass
0 to 10 sec Select the time the print head pauses to allow drying after each pass.
Choose from values between 0.0 and 10.0 seconds. The time needed for
the ink to dry varies with ink density and the media used. If the ink blurs on
the media, set a longer time for drying the ink.
Increasing the drying time increases the time needed to print.
After Heater Feed Mode 1
To feed media to the after heater after printing, choose Mode 1 or Mode 2;
otherwise, choose Off.
If Mode 1 is selected, the portion fed for drying will not be rewound before
the next job starts. Select this option if the media will be cut before the next
job starts.
If Mode 2 is selected, the portion fed for drying will be rewound before the
next job starts, eliminating unnecessary margin. Select this option if
multiple jobs will be printed consecutively.
Mode 2
Off
Additional Dryer
On This item is displayed only when the additional print drying system
(supplied with the SC-S50600 series; optional with other models) is
installed.
Select On to enable, or Off to disable, the additional print drying system
(supplied with the SC-S50600 series; optional with other models). Note
that even when On is selected, the additional print drying system will turn
off with the heaters when the Heat Off Timer expires. The additional print
drying system will turn back on when the heaters resume operation. Heat
Off TimerU “The Printer Setup Menu” on page 149
Off
Advanced Settings During general use, use the default setting value without changing it.
When using special media or when a problem such as head striking or
banding is detected in printing results, change the default.
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Using the Control Panel Menu
147
147


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SureColor SC-S50600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SureColor SC-S50600 in the language / languages: English as an attachment in your email.

The manual is 6,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SureColor SC-S50600

Epson SureColor SC-S50600 Installation Guide - English, German - 56 pages

Epson SureColor SC-S50600 User Manual - German - 217 pages

Epson SureColor SC-S50600 Installation Guide - Dutch - 56 pages

Epson SureColor SC-S50600 User Manual - Dutch - 182 pages

Epson SureColor SC-S50600 Installation Guide - French, Italian, Portuguese, Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info