617685
86
Zoom out
Zoom in
Previous page
1/198
Next page
C
Choose a value.
Heater Temperature
The temperatures for the pre-, platen, and after
heaters can each be adjusted separately.
Note:
The standard heater temperatures are as
follows.
Set the heaters to the temperatures
recommended in the documentation
provided with the media, if available.
Raise the temperature if the print results are
blurred or smudged or the ink clots. Note,
however, that raising the temperature too
high can cause the media to shrink, wrinkle,
or deteriorate.
The time needed for the heaters to reach the
specified temperatures varies with the ambient
temperature.
(1)
Use the r/l buttons to select a heater. From
left, the options are pre-heater, platen heater,
and after heater.
(2)
After selecting the desired heater, use the d/u
buttons to choose the temperature.
(3)
After making the setting, press the Z button.
Additional Dryer
Note:
This menu is displayed only when the optional
additional print drying system (supplied with
the SC-S50600 series; optional with other
models) is installed.
The default setting is set to On, and the drying
fan turns on automatically when printing
starts.
(1)
Use the d/u buttons to select On or Off.
(2)
Press the Z button.
D
Press the y button twice to return to the
customize settings menu.
Media Adjust
This menu is used to adjust media when Auto Media
Adjust cannot be used or when reconfiguring media
settings is required due to a change made in printing
conditions after saving the media settings. In this menu,
perform Feed Adjustment and Head Alignment
individually.
Media adjustment when Auto Media Adjust cannot
be used
When you cannot adjust media using Auto Media
Adjust or when banding or graininess is detected in
printing results even after Auto Media Adjust has been
performed, select Feed Adjustment - Manual and
Head Alignment - Standard (Manual) to take
appropriate actions.
When changing printing conditions after saving
media settings
After saving media settings, select Feed Adjustment -
Auto in this menu when:
The Media Tension or Media Suction setting has
been changed in Advanced Settings;
Counterweights have been attached to or detached
from the tensioner;
The standard media unit and the optional heavy roll
media system have been switched; or
The configuration of pressure rollers have been
changed (SC-S70600 series, SC-S50600 series).
When Platen Gap has been changed, select Head
Alignment - Standard (Auto) in this menu. However, if
the setting value is changed to 2.5, auto adjustment
becomes unavailable. Perform Standard (Manual).
Change the setting values of the following items before
executing this menu.
Platen Gap
Advanced Settings
U “Customize Settings” on page 145
Feed Adjustment
This menu is used when banding (horizontal banding,
tint unevenness, or stripes) is detected in printing
results.
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Basic Operations
86
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SureColor SC-S50600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SureColor SC-S50600 in the language / languages: English as an attachment in your email.

The manual is 6,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SureColor SC-S50600

Epson SureColor SC-S50600 Installation Guide - English, German - 56 pages

Epson SureColor SC-S50600 User Manual - German - 217 pages

Epson SureColor SC-S50600 Installation Guide - Dutch - 56 pages

Epson SureColor SC-S50600 User Manual - Dutch - 182 pages

Epson SureColor SC-S50600 Installation Guide - French, Italian, Portuguese, Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info