617689
17
Zoom out
Zoom in
Previous page
1/124
Next page
When using the printer, observe the operating
temperature and humidity range described in the
"Specifications Table". U “Specifications Table”
on page 110
Note, however, that the desired results may not be
achieved if the temperature and humidity are
within the limits for the printer but not within those
for the media. Be sure the operating conditions suit
the media. For more information, see the
documentation supplied with the media.
Also, when operating in dry areas, air conditioned
environment, or under direct sunlight, maintain
the appropriate humidity.
Avoid using the printer in locations with heat
sources or that are exposed to direct draughts from
ventilators or air conditioners. The print head
nozzles could dry out and clog.
Do not bend or tug the waste ink tube. Ink could
spill inside or around the printer.
Maintenance such as cleaning and replacement
must be performed according to usage frequency or
at recommended intervals. Failure to perform
regular maintenance could result in loss of print
quality. In the absence of the appropriate
maintenance, continued use could damage the
print head.
U “Cleaning Locations and Cleaning Timing” on
page 51
The print head may not be capped (the print head
may not return to the right side) if the printer is
turned off when the media is jammed or an error
has occurred. Capping is a function for
automatically covering the print head with a cap
(lid) to prevent the print head from drying out. In
this case, turn on the power and wait a while until
capping is performed automatically.
When the power is on, do not remove the power
plug or cut the power at the breaker. The print head
may not be capped properly. In this case, turn on the
power and wait a while until capping is performed
automatically.
The print head is automatically cleaned at a fixed
interval after printing to keep the nozzle from
clogging.
Be sure that the Waste Ink Bottle is placed whenever
the printer is on.
As well as being expended during printing, ink is
used during head cleaning and other maintenance
required to keep the print head in working order.
Notes when not using the printer
If you are not using it, note the following points when
storing the printer. If it is not stored correctly, you may
not be able to print properly the next time it is used.
If the printer will not be used for an extended period
(and switched off), use Cleaning Cartridge
(available separately) and perform Pre-Storage
Maint. Leaving the heads unwashed causes
permanent clogs.
See the following for more information.
U “Long-term Storage (Pre-storage
Maintenance)” on page 74
If you do not print for a long time and do not
perform pre-storage maintenance, turn the printer
on at least once every seven days.
If you do not print for a long time, the print head
nozzles may become clogged. Head cleaning will be
performed automatically after the printer is turned
on and started. Head cleaning prevents clogged
print heads and maintains print quality. Do not
turn the printer off until cleaning is complete.
If you have not used the printer for a long time,
check the print head for clogging before you start
printing. Perform head cleaning if the print head is
clogged.
U “Printing nozzle check patterns” on page 72
The pressure rollers may crease media left in the
printer. The media may also become wavy or
curled, causing jams or resulting in the media
coming into contact with the print head. Remove
the media before putting the printer in storage.
Store the printer after confirming that the print
head has been capped (the print head is positioned
at the far right). If the print head is left uncapped for
a long time, the print quality may decline.
Note:
If the print head is not capped, turn the printer on, and
then turn it off.
SC-S60600 Series/SC-S40600 Series User's Guide
Introduction
17
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SureColor SC-S40600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SureColor SC-S40600 in the language / languages: English as an attachment in your email.

The manual is 9,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SureColor SC-S40600

Epson SureColor SC-S40600 Installation Guide - English, German - 32 pages

Epson SureColor SC-S40600 User Manual - German - 134 pages

Epson SureColor SC-S40600 Installation Guide - Dutch - 32 pages

Epson SureColor SC-S40600 User Manual - Dutch - 133 pages

Epson SureColor SC-S40600 Installation Guide - French, Italian, Portuguese, Spanish - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info