617676
21
Zoom out
Zoom in
Previous page
1/177
Next page
D Media info
From left to right, this display shows the selected
media, platen gap, media width, and media
remaining.
If a media setting bank number created with this
printer is selected as the print media, the number
(from 1 to 30) will be displayed. When RIP Settings is
selected, 0 will be displayed.
The selected platen gap is shown as follows.
:1.5
:2.0
:2.5
The media remaining is not displayed if Off is selected
for Remaining Setup in the Media Remaining menu.
U “The Media Setup Menu” on page 109
E Chip unit status
The display changes as shown below when an error is
detected in the installed chip unit.
Normal Warning or error
1 Status indicators
The chip unit status is indicated as follows.
: No error. Ready to print.
: An error occurred. Check the message
on the screen, and clear the error.
: The chip unit could not be recognized
or it is not compatible with the printer.
Or, the slider is not locked.
Check the on-screen message.
: Check the ink level in the ink tank, and
then replace the chip unit and refill the
ink correctly.
As it gets closer to time to replace the
chip unit,
will begin to flash.
U “Chip Unit Replacement and Ink
Refills” on page 85
2 Ink color codes
HDK
*
:High Density Black
BK
*
:Black
Y : Yellow
M:Magenta
C:Cyan
* Either is displayed depending on the usage en‐
vironment.
F Waste Ink Bottle status
Displays the approximate amount of space available
in theWaste Ink Bottle. The display changes as
shown below when the waste ink bottle is nearly full
or an error occurs.
Normal Warning or error
1
SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
Introduction
21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SureColor SC-F7200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SureColor SC-F7200 in the language / languages: English as an attachment in your email.

The manual is 7,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SureColor SC-F7200

Epson SureColor SC-F7200 Installation Guide - English, German - 44 pages

Epson SureColor SC-F7200 User Manual - German - 189 pages

Epson SureColor SC-F7200 Installation Guide - Dutch - 44 pages

Epson SureColor SC-F7200 User Manual - Dutch - 189 pages

Epson SureColor SC-F7200 Installation Guide - French, Italian, Portuguese, Spanish - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info