617674
81
Zoom out
Zoom in
Previous page
1/101
Next page
Test Pattern Does Not Print Correctly
o
Perform head cleaning.
The nozzles may be clogged. Print a test pattern again
after performing head cleaning.
U “Head Cleaning” on page 51
o
Has the printer been left unused for a long
time?
If the printer has not been used for a long time, the
nozzles may have dried up and have been clogged.
Steps to take when the printer has not been used for a
long time U “Notes when not using the printer” on
page 18
The prints are not what you
expected
Print quality is poor, uneven, too
light, or too dark.
o
Are the print head nozzles clogged?
If the nozzles are clogged, specific nozzles do not fire
ink and the print quality declines. Try printing a test
pattern.
U “Checking for clogged nozzles” on page 51
o
Was Head Alignment performed?
Select Head Alignment to realign the print head when
print results seem grainy or out of focus.
U “Correcting Print Misalignment (Head
Alignment)” on page 45
o
Have you tried Feed Adjustment?
Large discrepancies in the feed amount cause
banding (horizontal banding, lines, or strips of uneven
color). Perform Feed Adjustment according to the
media used.
U “Feed Adjustment” on page 43
o
Are you using a genuine Epson ink pack?
The printer is designed for use with the genuine Epson
ink packs specified in this manual. Using any other
type of ink pack may result in reduced print quality.
We recommend using only the genuine ink packs
specified in this manual.
o
Are you using an old ink pack?
The print quality declines when an old ink pack is used.
Use a new ink pack. Use all the ink in the ink pack
before the date printed on ink pack.
o
Are media settings correct?
Confirm that the media settings in the software RIP or
on the printer match the media actually in use.
o
Is Data Width selected for Head Movement?
Selecting Data Width for Head Movement in the
setup menu increases print speed but may slightly
reduce print quality. For better quality results, select
Printer Full Width for Head Movement. U “Printer
Setup Menu” on page 73
o
Have you compared the printing result with
the image on the display monitor?
Since monitors and printers produce colors
differently, printed colors will not always match
on-screen colors perfectly.
o
Was a printer cover opened during printing?
Opening covers during printing causes the print head
to stop abruptly, resulting in uneven colors. Do not
open the covers while printing is in progress.
The print is not positioned properly
on the media.
o
Is the media loaded correctly and are the
margins correct?
If the media is not loaded correctly, the results may be
off center or part of the data may not be printed. You
should also check whether the correct options are
selected for Side Margin and Print Start Position in
the setup menu.
U “Loading Media” on page 23
U “Printer Setup Menu” on page 73
o
Is the media skewed?
If Off is selected for Media Skew Check in the setup
menu, printing will continue when the media is
skewed and data will appear outside the print area.
Set Media Skew Check to On in the Menu.
U “Printer Setup Menu” on page 73
SC-F7000 Series User’s Guide
Problem Solver
81
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SureColor SC-F7000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SureColor SC-F7000 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SureColor SC-F7000

Epson SureColor SC-F7000 Installation Guide - English, German - 40 pages

Epson SureColor SC-F7000 User Manual - German - 112 pages

Epson SureColor SC-F7000 Installation Guide - Dutch - 40 pages

Epson SureColor SC-F7000 User Manual - Dutch - 110 pages

Epson SureColor SC-F7000 Installation Guide - French, Italian, Portuguese, Spanish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info