617672
61
Zoom out
Zoom in
Previous page
1/81
Next page
o
Is the roll paper margin set to 15 mm or 35
mm?
If the value selected for Roll Paper Margin in the
Setup menu is wider than the margins selected in the
application, priority will be given to the value selected
for Roll Paper Margin. For example, if 15 mm is
selected for the left and right margins in the printer
menus and the document fills the page, the 15 mm at
the left and right sides of the page will not be printed.
U “Printable area” on page 30
Vertical ruled lines are misaligned.
o
Is the print head misaligned? (in bidirectional
printing)
With bidirectional printing, the print head prints while
moving left and right. If the print head is misaligned,
ruled lines may be misaligned accordingly. If vertical
ruled lines are misaligned with bidirectional printing,
perform Head Alignment.
U “Minimizing Print Misalignments (Head
Alignment)” on page 46
The printed surface is scuffed or
soiled.
o
Is the paper too thick or too thin?
Check that the paper specifications are compatible
with this printer. For information about the paper
types and appropriate settings for printing when
using RIP software, contact the manufacturer of the
RIP.
o
Is the paper creased or folded?
Do not use old paper or paper with folds in it. Always
use new paper.
o
Is the print head scuffing the printed surface?
If the surface of the paper is scuffed, select a Platen
Gap option between Wide and Wider in the Paper
menu.
U “Paper menu” on page 37
o
Is the print head scuffing the edge of the
paper?
Select Top35mm/Bottom15mm for the Roll Paper
Margin option in the Setup menu.
U “Setup menu” on page 40
o
Widen the bottom margin
Depending on the content of the print data, the
bottom edge may be scuffed when printing. In this
situation it is best to create your data with a bottom
margin of 150 mm.
o
Does the interior of the printer need
cleaning?
The rollers may need cleaning. Clean the rollers by
feeding and ejecting paper.
U “Cleaning the inside” on page 55
The reverse side of the printed paper
is soiled.
o
Select On for Paper Size Check in the menus.
Although printing normally stops if the print image is
wider than the paper, when Off is selected for Paper
Size Check in the Setup menu, the printer may print
outside the bounds of the paper, getting ink on the
inside of the printer in the process. This can be
prevented by selecting On for Paper Size Check in
the Setup menu.
U “Setup menu” on page 40
o
Is ink dry on the printed surface?
Depending on the printing density and media type,
the ink may take a while to dry. Do not stack the paper
until the printed surface is dry.
U “Cleaning the inside” on page 55
Feeding or ejecting problems
Unable to feed or eject paper.
o
Is the paper loaded in the correct position?
See the following for the correct paper loading
positions.
U “Loading Roll Paper” on page 21
If the paper is loaded correctly, check the condition of
the paper that you are using.
o
Is the paper creased or folded?
Do not use old paper or paper with folds in it. Always
use new paper.
SC-F6000 Series User’s Guide
Problem Solver
61
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SureColor SC-F6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SureColor SC-F6000 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SureColor SC-F6000

Epson SureColor SC-F6000 Installation Guide - English - 20 pages

Epson SureColor SC-F6000 User Manual - German - 89 pages

Epson SureColor SC-F6000 Installation Guide - German, Dutch - 20 pages

Epson SureColor SC-F6000 User Manual - Dutch - 87 pages

Epson SureColor SC-F6000 Installation Guide - French, Italian, Portuguese, Spanish - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info