617672
28
Zoom out
Zoom in
Previous page
1/81
Next page
B
Press the d/u buttons to highlight Custom
Paper Setting and press the Z button.
The Custom Paper Setting menu will be
displayed.
C
Press the d/u buttons to select the bank (1 to 10)
where you want to save the custom paper
settings, then press the Z button.
The custom paper settings menu for the selected
number will be displayed.
Note that if you select a number for which
settings have already been saved, the old settings
will be overwritten.
Note:
Press the W button to close the settings menu.
Select Reference Paper
Select the paper type that is the closest in characteristics
to the paper you are using.
A
Select Select Reference Paper in the paper
settings menu, then press the Z button.
B
Press the d/u buttons to select reference paper,
and then press the Z button.
C
Press the d/u buttons to select the paper closest
to the one you are using, then press the Z
button.
D
Press the y button twice to return to the paper
settings menu.
Platen Gap
Select the platen gap which is the distance between the
print head and the paper. Normally, select Standard.
Select a wider setting if printed images are smeared. If,
upon performing head alignment you feel that it is still
not completely aligned, select Narrow.
A
Press the d/u buttons on the paper settings
menu to highlight Platen Gap and then press the
Z button.
B
Press the d/u buttons to select the target setting
value, and then press the Z button.
C
Press the y button to return to the paper settings
menu.
Detect Paper Thickness
You can print out a paper thickness detection pattern to
determine and set the optimal paper thickness based on
the printout.
A
Press the d/u buttons on the paper settings
menu to highlight Detect Paper Thickness and
then press the Z button.
B
Press the Z button to print the paper thickness
detection pattern.
C
Press the d/u buttons to select the number of the
pattern with the least amount of discrepancy
between the lines in the printout, and then press
the Z button to return the printer to the
ready-to-print state.
Paper Feed Adjust
If the paper feed amount is not set correctly, banding
(horizontal band patterns or discoloration) may occur.
If the banding is not resolved after head cleaning or
Head Alignment is performed, adjust the amount of
paper feed correction. This value can be set in either of
the following two ways:
Pattern
Visually check the printed pattern and enter the
correction value.
Value
Change the value based on the banding observed.
The correction value is set as the ratio in relation to
1 meter (-0.70 to +0.70%).
Printing an Alignment Pattern for Correction
A
Select Custom Paper Setting from the paper
menu.
B
Press the d/u buttons to select the bank where
you want to save the custom paper settings, then
press the Z button.
C
Press the d/u buttons to highlight Paper Feed
Adjust and press the Z button.
SC-F6000 Series User’s Guide
Basic Operations
28
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SureColor SC-F6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SureColor SC-F6000 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SureColor SC-F6000

Epson SureColor SC-F6000 Installation Guide - English - 20 pages

Epson SureColor SC-F6000 User Manual - German - 89 pages

Epson SureColor SC-F6000 Installation Guide - German, Dutch - 20 pages

Epson SureColor SC-F6000 User Manual - Dutch - 87 pages

Epson SureColor SC-F6000 Installation Guide - French, Italian, Portuguese, Spanish - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info