617671
79
Zoom out
Zoom in
Previous page
1/104
Next page
Message What to do
USB Memory Error
Failed to write to USB memory.
The USB memory may be in one of the following conditions.
The USB memory is damaged
The USB memory was removed while data was being written
There is not enough free space or the number of saved files has reached the
maximum limit
U “USB memory requirements” on page 40
Check that the USB memory is not damaged and that there is enough free space.
Platen Move Error
Abnormal platen move detected.
Check platen path and press +.
A foreign object was detected in the platen's path while it moved forward or backward
into the printer. Check for the object in the platen's path and beneath the movable base.
Open the printer cover if necessary to check inside the printer. Close the printer cover after
checking.
Platen Height Error
Height sensor has detected
obstruction. Press } to move
platen and check shirt height.
The height detection sensor may have reacted because of the uneven print surface of the
loaded T-shirt. Press the } button to move the platen forward, adjust the height, and try
again.
U “Adjusting the Height” on page 35
F/W Install Error
Firmware update failed.
Restart the printer.
Turn the printer off, wait for a while, and then turn on the printer again.
Use EPSON LFP Remote Panel 2 to re-attempt the update.
If this message appears on the LCD panel again, contact your dealer or Epson Support.
Command Error
Check print settings on RIP.
Press the + button and cancel the print job. Check that the installed RIP software is
compatible with the printer.
Information
Some time has passed since
operation began. Finish task
quickly; nozzle check is
recommended once task is
complete.
10 minutes or more has passed since you started cap cleaning or head cleaning set
replacement. If the print head is moved out of its designated position for more than 10
minutes, the nozzles could easily be clogged. Finish cleaning or replacement as soon as
possible. When you have finished the operation, we recommend performing a nozzle
check to confirm that the nozzles are not clogged.
U “Checking for clogged nozzles” on page 44
Information
Power On Cleaning is off. Perform
head cleaning if required.
If cleaning is not performed for White ink for a certain period of time, print quality may
decline due to sedimentation (ink particles sink to the bottom of the liquid) and clogged
nozzles. Clean the printer if the printer is turned off for a long time.
When a Maintenance Call/Service Call Occurs
Message What to do
Maintenance Request
Replace Part Soon/Replace Part
Now
XXXXXXXX
A part used in the printer is nearing the end of its service life.
Contact your dealer or Epson Support and tell them the maintenance request code.
You cannot clear the maintenance request until the part is replaced. A service call occurs if
you continue to use the printer.
SC-F2000 Series User’s Guide
Problem Solver
79
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SureColor SC-F2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SureColor SC-F2000 in the language / languages: English as an attachment in your email.

The manual is 4,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SureColor SC-F2000

Epson SureColor SC-F2000 Quick start guide - English, German - 33 pages

Epson SureColor SC-F2000 User Manual - German - 121 pages

Epson SureColor SC-F2000 User Manual - Dutch - 112 pages

Epson SureColor SC-F2000 Quick start guide - Dutch, French, Italian, Portuguese, Spanish - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info