20054
21
Zoom out
Zoom in
Previous page
1/28
Next page
21
English
11. Press the Pause button.
The printer heads move and the paper
automatically feeds into the printing position.
READY appears on the LCD panel.
Note:
Even if you do not press the Pause button, the
print heads move and paper feeds into the printing
position automatically. READY appears on the LCD
panel.
Now you are ready to print on roll paper. Make
the printer driver settings, then send the print job.
(See the User’s Guide for detailed informations).
Note:
Allow time for the ink to dry thoroughly after
printing to ensure the printout quality.
If you do not use the paper set above, remove it from
the printer. When you use roll paper, set the paper
lever to the released position, and wind it up. When
you use cut sheet, remove the paper from the printer
and store it separately.
Loading the Cut Sheet Media
To load cut sheet media longer than 483 mm (long
edge of Super A3/B), see the next section. To load
paper with a length of A4, Letter, A3, US B, and
Super A3/B, see “Loading Cut Sheet Media with
a Length of A4/Letter, A3/US B, and Super
A3/B” on page 22.
If you are printing on thick paper (0.5 to 1.5 mm),
see “Printing on Thick Paper (0.5 to 1.5 mm)” on
page 23.
Loading Cut Sheet Media Longer
than 483 mm (Long Edge of Super
A3/B)
To load cut sheet media longer than 483 mm,
follow the steps below.
c
Caution:
As much as possible, keep your fingers off the
printable surface of the media, as fingerprints
may reduce printout quality.
1. Make sure that the printer is on and the roll
paper cover is closed.
2. Press the Paper Source l button repeatedly
until Sheet appears.
3. Make sure that the Power light is not flashing,
and then set the paper lever to the released
position. The LEVER RELEASED. LOAD PAPER
appears on the LCD panel.
c
Caution:
Do not set the paper lever to the released
position while the Power light is flashing;
otherwise, damage may occur.
4. Load the sheet into the paper insertion slot
until it comes out below. Make sure that the
right and bottom edges of the sheet are
straight and in line with the horizontal line
and the vertical line.
5. Set the paper lever to the secured position.
PRESS PAUSE BUTTON appears on the LCD
panel.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson STYLUSPro9400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson STYLUSPro9400 in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson STYLUSPro9400

Epson STYLUSPro9400 User Manual - English - 385 pages

Epson STYLUSPro9400 Installation Guide - German - 28 pages

Epson STYLUSPro9400 User Manual - German - 422 pages

Epson STYLUSPro9400 Installation Guide - Dutch - 28 pages

Epson STYLUSPro9400 User Manual - Dutch - 416 pages

Epson STYLUSPro9400 User Manual - Spanish - 423 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info