531424
9
Zoom out
Zoom in
Previous page
1/44
Next page
9
N
k Copies
d 1 - 9 E H P -
The memory
card printing
option is in
DPOF mode.
Indicates the
number of
copies.
The printer continues to
copy until the paper you
loaded runs out. You can
load up to 100 sheets.
An error has
occurred.
An
unsupported
device (HUB)
is connected.
Flashes when a camera with PictBridge
data is connected. When the connected
device is not supported, the P and the
error light double-ash.
The printer enters “sleep mode
when no buttons are pressed for 13
minutes. Press any button (except
the P On button) to “wake” it.
Loption
d’impression
à partir d’une
carte mémoire
est en mode
DPOF.
Indique le
nombre de
copies.
L’imprimante poursuit
la copie jusqu’à ce que
le papier chargé soit
totalement utilisé. Vous
pouvez charger un
maximum de 100 feuilles.
Une erreur
s’est
produite.
Un
périphérique
(concentrateur)
non pris en
charge est
connecté.
Clignote lors de la connexion d’un
appareil photo contenant des données
PictBridge. Si le périphérique connecté
n’est pas pris en charge, le voyant P
et le voyant d’erreur clignotent en
alternance.
Si vous n’appuyez sur aucune touche
pendant 13 minutes, le mode de
veille de l’imprimante est activé.
Appuyez sur nimporte quelle touche
(à l’exception de la touche P On)
pour quitter le mode de veille.
Der Druck
von der
Speicherkarte
ist auf den
DPOF-Modus
eingestellt.
Gibt die
Anzahl der
Kopien an.
Der Drucker druckt
solange, bis das eingelegte
Papier zu Ende ist. Sie
können bis zu 100 Blatt
einlegen.
Ein Fehler ist
aufgetreten.
Ein nicht
unterstütztes
Gerät (HUB) ist
angeschlossen.
Blinkt, wenn eine Kamera mit
PictBridge-Daten angeschlossen ist.
Wenn das angeschlossene Gerät nicht
unterstützt wird, blinken sowohl P als
auch das Fehlerlämpchen.
Wenn 13 Minuten lang keine Taste
gedrückt wird, wechselt der Drucker
in den Stromsparmodus. Zur
normalen Funktionswiederaufnahme
drücken Sie eine beliebige Taste
(außer P On).
Er wordt in
DPOF-modus
afgedrukt
vanaf een
geheugenkaart.
Het aantal
exemplaren.
De printer gaat door met
kopiëren tot het geladen
papier op is. U kunt
maximaal 100 vel laden.
Er is een fout
opgetreden.
Er is een
apparaat
(HUB)
aangesloten
dat niet wordt
ondersteund.
Knippert wanneer een camera met
PictBridge-gegevens is aangesloten.
Wanneer het aangesloten apparaat niet
wordt ondersteund, knipperen de P en
het foutlampje dubbel.
Wanneer 13 minuten lang geen
enkele knop wordt ingedrukt, gaat
de printer in de slaapstand. Druk
op een willekeurige knop (behalve
P On) om de printer wakker te
maken.
O = on, k = ashing
O = allumé, k = clignotant
O = ein, k = blinkend
O = aan, k = knippert
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson Stylus TX209 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson Stylus TX209 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info