462871

Epson STYLUS SX610FW Manual

78
Zoom out
Zoom in
Previous page
1/100
Next page
78
Error Messages Solution
Paper jam. Open the scanner unit and remove the jammed
paper. Then close the scanner unit and press
x. See your
documentation.
R & 86
Paper jam. Open the scanner unit, remove jammed paper
in the product, then power o and on again. For details,
see your documentation.
R & 87
Communication error. Make sure the computer is
connected, then try again.
Make sure the computer is connected correctly. If the error message
still appears, make sure that scanning software is installed on your
computer and that the software settings are correct.
A printer error has occurred. Turn power o and then on
again. For details, see your documentation.
Turn the printer o and then back on. Make sure that no paper is still in
the printer. If the error message still appears, contact Epson support.
A scanner error has occurred. Turn power o and then on
again. If the error is not xed, contact your dealer.
Turn the printer o and then back on. If the error message still appears,
contact Epson support.
The printer’s ink pads are nearing the end of their service
life. Please contact Epson Support.
Contact Epson support to replace ink pads before the end of their
service life. When the ink pads are saturated, the printer stops and
Epson support is required to continue printing.
The printer’s ink pads are at the end of their service life.
Please contact Epson Support.
Contact Epson support to replace ink pads.
Error in the data. The document cannot be printed. The
data is not available because of a malfunction in the
sending device.
See the documentation for the device transmitting the data. (Cause:
The data is not available because of a malfunction in the device.)
Error in the data. The document may not be printed
correctly. A part of the data is corrupted or cannot be
buered.
See the documentation for the device transmitting the data. (Cause: A
part of the data is corrupted or cannot be buered.)
Cannot recognize the device. Make sure the storage disk has been inserted correctly.
Cannot recognize the memory card or disk. Make sure the memory card or storage disk has been inserted correctly.
If so, check to see if there is a problem with the card or disk and try
again.
Backup Error.
Error Code xxxxxxxx
A problem occurred and backup was canceled. Make a note of the
error code and contact Epson support.
The combination of IP address and subnet mask is invalid.
See your documentation.
Refer the online User’s Guide - Networking.
Error Messages
Messages d’erreur
Fehlermeldungen
Foutmeldingen
EN
EN
R & 78
FR
R & 79
DE
R & 80
NL
R & 81
… 78 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson STYLUS SX610FW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson STYLUS SX610FW in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info