617725
11
Zoom out
Zoom in
Previous page
1/187
Next page
The Control Panel
Buttons, Lights, and
Messages
You can check the ink remaining and printer status on
the control panel.
Buttons
1. Power button ( )
Turns the printer on or off.
2. Pause/Reset button ( )
The printer enters the PAUSE state when this
button is pressed in the READY state. To cancel
the pause, select PAUSE CANCEL on the LCD
panel. When selecting JOB CANCEL, it functions
as the Reset button. The printer stops printing
and clears print data in the printer. After clearing
the data, it may take a while to return to the
READY state.
The printer returns to the READY state when this
button is pressed in the Menu mode.
Clears errors if it is possible.
See “Error messages” on page 87
3. Cleaning button ( )
Performs the normal cleaning for the print head (all
colors). If you notice the print quality has declined,
this will improve the print quality.
See “Head cleaning” on page 75
4. Ink Cover Open button ( )
Slightly opens the ink cover, selecting OPEN RIGHT
COVER indicated on the display.
5. Paper Source button ( )
Selects a paper source and roll paper cut method.
The icon changes by pressing this button.
However, you cannot change the paper source
icon to Sheet
when you set the paper while
REMAINING PAPER SETUP is set to ON.
When you print from the printer driver, the
settings you make on the printer driver have
priority over the settings you make on the
printer’s control panel.
Icon Explanation
Roll Auto Cut
On
Prints on the roll paper.
It cuts the roll paper
automatically after
printing each page.
Roll Auto Cut
Off
Prints on the roll paper.
It does not cut the
paper automatically
after printing. You need
to cut the paper with a
cutter manually.
Sheet Prints on the sheet.
Returns to the previous level when pressed in the
Menu mode.
6. Paper Feed button ( / )
Feeds the roll paper in the forward or reverse
direction. If you want to feed the paper faster
in the forward
direction, press and hold it for
3 seconds. You can feed 20 cm of paper in the
reverse
direction with one press.
If you press these buttons while the paper presser
is released, you can adjust the paper suction in the
paper feed path in 3 stages.
See “Loading cut sheet A3 size or larger /
thick paper” on page 37
Press the
button when setting a single cut
sheet having a thickness under 0.5 mm, the
printer starts paper feeding and then goes to the
READY state.
Feeds the sheet in the forward direction when you
press the
button.
Changes the parameter in the forward
or
reverse
order when selecting a desired
parameter in the Menu mode.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide
The Control Panel
11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson Stylus Pro 9710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson Stylus Pro 9710 in the language / languages: English as an attachment in your email.

The manual is 9,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson Stylus Pro 9710

Epson Stylus Pro 9710 Installation Guide - English, German - 28 pages

Epson Stylus Pro 9710 User Manual - German - 212 pages

Epson Stylus Pro 9710 Installation Guide - Dutch - 28 pages

Epson Stylus Pro 9710 User Manual - Dutch - 209 pages

Epson Stylus Pro 9710 Installation Guide - French, Italian, Portuguese, Spanish - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info