617718
23
Zoom out
Zoom in
Previous page
1/28
Next page
21
English
Loading the Cut Sheet Media
To load cut sheet media longer than A3 or Legal,
see the next section. To load A4, Letter or 8 × 10
inch cut sheet media, see “Loading Cut Sheet
Media with a Size of A4, Letter or 8 × 10 Inches”
on page 22.
If you are printing on thick paper (0.5 to 1.5 mm),
see “Printing on Thick Paper (0.5 to 1.5 mm)” on
page 22
Loading Cut Sheet Media Longer
than A3 or Legal
To load cut sheet media longer than A3 or Legal,
follow the steps below.
c
Caution:
As much as possible, keep your fingers off the
printable surface of the media, as fingerprints
may reduce printout quality.
1. Make sure that the printer is on and the roll
paper cover is closed.
2. Press the Paper Source l button repeatedly
until Sheet appears.
3. Make sure that the Power light is not flashing,
and then set the paper lever to the released
position. LEVER RELEASED. LOAD PAPER
appears on the LCD panel.
c
Caution:
Do not set the paper lever to the released
position while the Power light is flashing;
otherwise, damage may occur.
4. Load the sheet into the paper insertion slot
until it comes out below. Make sure that the
right and bottom edges of the sheet are
straight and in line with the horizontal line
and the vertical line.
5. Set the paper lever to the secured position.
PRESS PAUSE BUTTON appears on the LCD
panel.
6. Press the Pause button.
The print heads move and the sheet feeds into
the printing position automatically. READY
appears on the LCD panel.
Now the printer is ready to print. While the printer
is printing, do not open the front cover. If the front
cover is opened while printing is in progress, the
printer stops printing, and then restarts printing
when the front cover is closed. Stopping and
restarting printing may reduce the print quality.
c
Caution:
Do not leave the paper in the printer for a long
period of time; its quality will deteriorate. We
recommend that you remove the paper from the
printer after printing.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson Stylus Pro 7880C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson Stylus Pro 7880C in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson Stylus Pro 7880C

Epson Stylus Pro 7880C User Manual - English - 373 pages

Epson Stylus Pro 7880C Installation Guide - German - 30 pages

Epson Stylus Pro 7880C User Manual - German - 375 pages

Epson Stylus Pro 7880C Installation Guide - Dutch - 28 pages

Epson Stylus Pro 7880C User Manual - Dutch - 383 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info