617755
162
Zoom out
Zoom in
Previous page
1/182
Next page
Problem Solver 162
User’s Guide
The print is not positioned
properly on the paper.
Have you specified the print area?
Check the print area in the settings of the application and printer.
Is the paper size setting correct?
If the Paper Size setting and the size of the actual paper do not match, the
print may not be where you want it, or part of it may be cut off. In this case,
check the print settings.
Is the paper skewed?
If PAPER SKEW CHECK in the panel settings is OFF, the paper is printed even if it
is skewed. In this case, the print will not be in the print area. Set PAPER SKEW
CHECK to ON in the Menu mode.
See “PRINTER SETUP” on page 20.
Does the print data fit within the paper width?
If the print image is bigger than the paper width, printing normally stops.
However, if the PAPER SIZE CHECK is OFF, the paper is printed even if the paper
width is exceeded. Set PAPER SIZE CHECK to ON in the Menu mode.
See “PRINTER SETUP” on page 20.
Is the roll paper margin set to 15 mm or 35 mm?
With auto rotation, or if you print to the full width of the paper (printing at A1
vertical size on 24-inch wide roll paper, or printing at A2 horizontal size), if the
ROLL PAPER MARGIN is set to 15 mm or 35 mm, the data extending beyond the
print area on the right side of the paper is not printed. Set ROLL PAPER MARGIN
to 3 mm.
See “PRINTER SETUP” on page 20.
Left/right ruled lines are
bumpy.
Is the print head misaligned (leaving gaps)? (during bidirectional printing)
With bidirectional printing, the print head prints while moving left and right.
If the print head is misaligned, ruled lines may be printed misaligned with
gaps. If vertical ruled lines are misaligned with bidirectional printing, adjust
the gap.
See “Print head alignment” on page 138.
The printed surface is scuffed
or soiled.
Is the paper too thick or too thin?
Check that the paper is a specification that can be used with this printer. For
information about the media types and appropriate settings for printing on
paper from other manufacturers or when using a raster image processor
(RIP), please refer to the handling instructions for the paper, or contact the
retailer of the paper or the manufacturer of the RIP.
Is the print head scuffing the printed surface with thick paper?
When using thick paper, the print head may scuff the printed surface. In this
case, set PLATEN GAP to a point between WIDE and WIDEST.
See “PRINTER SETUP” on page 20.
The paper is creased.
Are you using the printer at normal room temperature?
Epson's special paper should be used at normal room temperature
(temperature: 15 to 25°C, humidity: 40 to 60%). For information about paper
such as thin paper from other manufacturers that requires special handling,
refer to the relevant handling instructions.
When using paper other than Epson special media, have you set the paper
characteristics?
When using paper other than Epson special media, set the paper
characteristics (custom paper) before printing.
See “Printing with Non-Epson Media” on page 100.
Cause What to do
162


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson Stylus Pro 11880C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson Stylus Pro 11880C in the language / languages: English as an attachment in your email.

The manual is 9,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson Stylus Pro 11880C

Epson Stylus Pro 11880C Installation Guide - English - 28 pages

Epson Stylus Pro 11880C Installation Guide - German - 26 pages

Epson Stylus Pro 11880C User Manual - German - 183 pages

Epson Stylus Pro 11880C Installation Guide - Dutch - 28 pages

Epson Stylus Pro 11880C User Manual - Dutch - 182 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info