58970
14
Zoom out
Zoom in
Previous page
1/168
Next page
6
6 | Introduction
Windows System Requirements
To use your printer in either a standalone or peer-to-peer network
environment, your system should include the requirements listed below:
IBM
®
-compatible PC with a Pentium
®
II 400 MHz or higher processor
recommended
For parallel connection: Windows 95, 98, Me, NT 4.0, or 2000
For USB connection: PC with USB port running Windows 98 (factory
installed), Me, or 2000
For IEEE 1394 connection: PC with FireWire port running
Windows Me or 2000
For 10/100 BaseT Ethernet connection: Ethernet equipped PC running
Windows 95, 98, Me, NT 4.0, or 2000
256MB of RAM
At least 50MB of free hard disk space to install the software, and at least
150MB of free hard disk space for processing files (2GB or more
available hard disk space recommended)
Quad-speed (4×) CD-ROM or DVD drive for installing the printer
software
For parallel connection: a high-speed bidirectional, IEEE-1284
compliant parallel cable, 6 to 10 ft. (1.8 to 3 m) long, with a D-SUB,
25-pin, male connector for your computer and a 36-pin, Centronics
®
compatible connector for the printer
For USB connection: a computer running Windows 98, Me, or 2000
with a Windows compliant USB port and a shielded USB “AB” cable
from Series A (computer) to Series B (printer), up to 6.6 ft. (2 meters)
long
For IEEE 1394 (FireWire) connection: a compliant IEEE 1394 port
and a shielded IEEE 1394 cable
For network connection: the optional EpsonNet Print Server (described
on page 2) and compatible cable
Note
If you are not using Photo
Printing Accelerator in
your driver (see page 4-3
for details), or if you
are using a software or
hardware RIP, you
must have a Pentium III
700 MHz or higher
processor with 512MB
RAM to keep the printer
running at full engine
speed.
Caution
Using an improperly
shielded USB cable—
especially a cable more
than 6.6 ft. (2 meters)
long—may cause the
printer to malfunction.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson STYLUS PRO 10000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson STYLUS PRO 10000 in the language / languages: English as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info