590247
40
Zoom out
Zoom in
Previous page
1/56
Next page
40 Maintaining and Transporting
Tip:
It is a good idea to turn on your EPSON STYLUS PHOTO RX at
least once a month to maintain good print quality.
Checking the print head
You can print a nozzle check pattern to see if any print
head nozzles are clogged, or to check the results after
cleaning the print head.
1. Press the q Setup button. (If you have just
finished cleaning the print head, you can start the
nozzle check by pressing the x Start button.)
2. Use the u or d button to select Nozzle Check,
then press the r button.
3. Make sure plain paper is loaded, then press the
x Start button to print the nozzle check pattern.
4. Examine the nozzle check pattern you printed.
Each staggered line should be solid, with no gaps,
as shown.
If your printout looks okay, press the y Back
button to return to the main menu.
If you see any gaps, as shown below, press the
x Start button to clean the print head as
described in the next section.
Cleaning the print head
Follow these steps to clean the print head so it can
deliver ink properly. Print head cleaning uses ink, so
clean it only if quality declines.
Note:
If a message on the LCD screen tells you that a cartridge is empty
or low on ink, you cannot clean the print head. You must first replace
the indicated ink cartridge.
1. Make sure the EPSON STYLUS PHOTO RX is
turned on but not printing.
2. Press the q Setup button.
3. Use the u or d button to select Head Cleaning,
then press the r button.
4. Press the x Start button to start cleaning the print
head.
Cleaning takes about 60 seconds, during which
the message Print head cleaning in progress.
Please wait. appears on the LCD screen.
c Caution:
To avoid damaging the EPSON STYLUS PHOTO RX, never
turn it off while head cleaning is in progress.
5. When cleaning finishes, press the x Start button
to print a nozzle check pattern to check the results.
If you do not see any improvement after cleaning three
or four times, check the solutions beginning on
page 42. You can also turn the EPSON STYLUS
PHOTO RX off and wait overnight to allow any dried
ink to soften. Then try cleaning the print head again.
Aligning the Print Head
If your printouts look grainy or vertical lines appear
jagged, you may need to align the print head.
Note:
Make sure the front tray is in the paper position (lower position) and
the CD/DVD tray is not inserted in the EPSON STYLUS PHOTO
RX. For detailed information, see “Loading Paper” on page 4.
1. Make sure the EPSON STYLUS PHOTO RX is
turned on and not printing.
2. Load several sheets of plain paper.
3. Press the q Setup button.
4. Use the u or d button to select Head Alignment,
then press the r button.
5. Press the x Start button to print the alignment
pattern.
The following alignment sheet is printed.
Note:
Do not press the y Stop/Clear Settings button while printing
an alignment pattern.
6. Look at pattern #1 and find the patch that is most
evenly printed, with no noticeable streaks or lines.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson Stylus Photo RX640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson Stylus Photo RX640 in the language / languages: English as an attachment in your email.

The manual is 6,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson Stylus Photo RX640

Epson Stylus Photo RX640 User Manual - Dutch - 56 pages

Epson Stylus Photo RX640 Installation Guide - Dutch, Portuguese, Spanish - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info