146 Solving Problems
The Stylus Photo RX600 scanning software doesn’t work properly.
■ Make sure your system meets the requirements listed on page 159.
■ Check if your computer has enough memory for your software. If you’re
running other software at the same time, the computer may not have enough
memory. Try closing any open applications, including screen savers and virus
protection programs.
■ If you’re scanning a large image or scanning at a high resolution, your
computer may not have enough memory to process the image.
■ Make sure that EPSON Stylus Photo RX600 is selected in your application
software.
■ Check your software installation. If all else fails, uninstall your software, then
reinstall it; see page 153.
Paper Feed Problems
Too many copies are printing.
Make sure that the
Copies setting in your printer software and/or program aren’t
set for multiple copies.
Paper doesn’t feed correctly or jams in the Stylus Photo RX600.
■ If paper doesn’t feed, remove it from the sheet feeder. Fan the paper, load it
against the right side, and slide the left edge guide against the paper (but not
too tightly). Make sure it’s beneath the edge guide tabs.
■ If paper jams, turn off your Stylus Photo RX600, lift up the scanner, and
remove any paper that’s inside, including any small pieces that may have torn
off. Carefully reload paper, turn the Stylus Photo RX600 back on, and press
the x
Color button.
Caution:
Clear paper jams by pulling the paper out of the printer in the direction that it
normally feeds through the printer (towards the output tray). Never pull the paper
out backwards (in the direction of the sheet feeder).
■
If paper jams, make sure the feeder guard is not flipped forward. See “Loading
Single Sheets” on page 15 for details.
sprx600usersguide.book Page 146 Wednesday, February 25, 2004 1:47 PM
