58757
138
Zoom out
Zoom in
Previous page
1/167
Next page
Troubleshooting
7-14
Paper doesn’t feed correctly from the manual feeder.
Paper doesn’t feed correctly from the tractor feeder.
Try this Then do this
Remove the paper from the
manual feeder.
Check that the paper sheet isn’t:
Curled or creased.
Too thick or thin (see Appendix C).
Too old (see Chapter 3 or your paper packaging).
Jammed inside the printer. (If the Paper Out light is flashing,
paper is jammed. See page 7-15.)
Then reload the paper as described in Chapter 3, making sure that:
The paper release lever is set to the single sheet position.
The edge guides fit the paper’s width snugly, but not too
tightly.
The paper is loaded all the way into the printer.
No continuous paper is in the paper path. (Press Load/Eject to
park it out of the way.)
Try this Then do this
Remove the continuous
paper from the tractor
feeder following the
instructions on page 3-18.
Check that the paper isn’t:
Curled or creased.
Too thick or thin (see Appendix C).
Too old (see Chapter 3 or your paper packaging).
Jammed inside the printer. (If the Paper Out light is flashing,
paper is jammed. See page 7-15.)
Then reload the paper as described in Chapter 3, making sure that:
The paper release lever is set to the continuous paper position.
The paper stack is close enough to the printer, but has room in
front and back to load and eject without obstruction.
The paper’s holes are aligned on the sprockets, the sprockets
are locked and their covers are closed, and the paper is not too
slack.
No single sheet paper is in the paper path. (Press Load/Eject to
eject any sheets.)
Before printing, check that:
The paper source and paper size are set correctly in your
application or printer software. If you’re using DOS, check the
Page Length setting in default-setting mode (see Chapter 5).
The skip over perforation, auto tear-off, and banner modes are
set correctly for your media (see Chapter 5).
trouble.fm5 Page 14 Friday, May 9, 1997 2:11 PM
138


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson Stylus Photo 1520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson Stylus Photo 1520 in the language / languages: English as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info