511897
113
Zoom out
Zoom in
Previous page
1/152
Next page
Troubleshooting
6-5
The printed image is faint or has gaps.
The Halftoning and Color
Adjustment Mode options
are set incorrectly for your
document type.
Use the correct settings for the project you are printing, following
the instructions in Chapter 2.
The print head nozzles are
clogged.
Clean the print heads. See Chapter 5 for instructions.
The ICM (Windows) or
ColorSync (Macintosh)
settings are incorrect for
your document.
Use the Automatic mode setting or choose a different project
type setting. See Chapter 2 for more information.
The ink cartridges are low
on ink or empty.
Check the Ink Out B lights to see which cartridge you may need to
replace. See Chapter 5 for instructions.
The colors displayed on
your monitor don’t match
the printed colors.
Because your monitor and printer use different technologies to
represent colors, your printed colors cannot exactly match those
on your monitor screen. Use the ICM (Windows) or ColorSync
(Macintosh) settings. See Chapter 2 for more information.
The color settings in your
application software need
adjustment.
You may be able to adjust various color settings in your application
software. See your software documentation for more information.
Possible cause Solution
The print head nozzles are
clogged.
Clean the print heads. See Chapter 5 for instructions.
The Media Type setting
doesn’t match the loaded
paper.
Make sure the Media Type setting matches the loaded paper or
other media. Then the printer software can automatically select
other settings for the best quality. See Chapters 1 through 3.
The loaded paper is upside
down, damaged, old, or
dirty.
Remove the paper and reload a new stack with the printable side
facing correctly. See Chapter 3 for instructions.
The ink cartridges are low
on ink.
Check the Ink Out B lights to see which cartridge you may need to
replace. See Chapter 5 for instructions.
An ink cartridge is out of
ink.
If you replaced an ink cartridge before its ink out light came on, the
ink sensor was incorrectly reset. Replace the empty ink cartridge
with a new ink cartridge. See Chapter 5 for instructions. This
resets the ink sensor.
Possible cause Solution
Loire-PLUS.BK.book Page 5 Friday, May 2, 2003 2:56 PM
113


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson Stylus Color 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson Stylus Color 3000 in the language / languages: English as an attachment in your email.

The manual is 5,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson Stylus Color 3000

Epson Stylus Color 3000 User Manual - English - 286 pages

Epson Stylus Color 3000 User Manual - German - 129 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info