511897
252
Zoom out
Zoom in
Previous page
1/286
Next page
Signal
Pin
Return
Pin Signal Direction Description
18 - Logic H OUT Pulled up to +5 V through
3.9 k resistance
19-30 - GND - Twisted-pair return signal
ground level
31 30
INIT IN When this signal goes LOW,
the printer controller is reset
to its state when the power is
first turned on and the print
buffer is cleared. This level is
normally HIGH; its pulse width
must be more than 50 µs at
the receiving terminal.
32 29
ERROR OUT This signal level goes LOW
when the printer:
1) is out of paper
2) has jammed paper
3) is in an error state
4) is out of ink
33 - GND - Same as for Pins 19-30
34 - NC - Not used
35 - +5 V OUT Pulled up to +5 V through
3.3 K resistance
36 30
SLIN IN Not used
Note:
The column heading “Direction” refers to the direction of signal flow as
viewed from the printer.
“Return” denotes the twisted-pair return to be connected at signal ground
level. For the interface wiring, be sure to use a twisted-pair cable for each
signal and to complete the connection on the return side.
All interface conditions are based on TTL level. Both the rise and fall times of
each signal must be less than 0.2 microseconds.
Data transfer must be carried out by observing the ACKNLG or BUSY
signal. Data transfer to this printer can be carried out only after receipt of
the
ACKNLG signal or when the level of the BUSY signal is LOW.
L
Loire-p Ref. Guide
Rev.c
A5 size Appendix D
02-24-97 DR, pass 0
D-14
Specifications
252


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson Stylus Color 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson Stylus Color 3000 in the language / languages: English as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson Stylus Color 3000

Epson Stylus Color 3000 User Manual - English - 152 pages

Epson Stylus Color 3000 User Manual - German - 129 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info