Manual Epson Stylus Color 1160 (page 4 of 11) (English)

58881

Zoom out

Zoom in

1/11

EPSON Stylus COLOR 1160

4 -

EPSON Stylus COLOR 1160

9/99

Electrical

* Check the label on the back of the printer for your printer’s

voltage.

Environmental

Temperature

Operation 50 to 95 °F (10 to 35 °C)

Storage*

−4 to 104 °F (−20 to 40 °C)

1 month at 104 °F (40 °C)

Transit* –4 to 140 °F (–20 to 60 °C)

120 hours at 140 °F (60 °C)

Humidity (without condensation)

Operation 20 to 80% RH

Storage

5 to 85% RH

*Stored in shipping container

Safety Approvals

Safety standards UL 1950, CSA C22.2 No. 950

EMC FCC part 15 subpart B class B

Control Panel

Follow these guidelines when you check the control panel

lights.

Specification 120 V Model 220−240 V Model

Input voltage

range*

99 to 132 V 198 to 264 V

Rated frequency

range

50 to 60 Hz

Input frequency

range

49.5 to 60.5 Hz

Rated current 0.4 A 0.2 A

Power consumption Approx. 14 W (ISO/IEC 10561 Letter Pattern)

Approx. 3.5 W in standby mode

power

button

load/eject

button

cleaning

button

color ink

out light

black ink

out light

power

light

paper out

light

P is on The

Ppower light is on when the printer is on and

ready to print. It flashes when the printer is

receiving a print job, charging ink, or cleaning the

print head.

S flashes

and

are on

When the

S paper out light flashes and both ink

out lights come on, you have a paper jam. Press

the

E load/eject button to try to clear the jam. If

that doesn’t work, turn off the printer and gently

pull out all the paper. Make sure none of the

sheets are curled, creased, old, stuck together, or

too thin. Then reload the paper against the right

edge guide and slide the left edge guide against it.

Turn on the printer and press the

E load/eject

button to resume printing.

S is on When the

S paper out light comes on, your paper

is out or incorrectly loaded. Make sure none of the

sheets are curled, creased, old, stuck together, or

too thin. Then reload the paper against the right

edge guide and slide the left edge guide against it.

Press the

E load/eject button to resume printing.

A flash When an ink out light flashes, your ink supply is

low. Make sure you have a replacement cartridge

(black S020189, color S020191).

A are on When an ink out light comes on, you need to

replace the ink cartridge. Make sure you have a

replacement cartridge (black S020189, color

S020191). See page 6 for instructions.

P and

flash and

B and

are on

When the

Ppower and

S paper out lights flash

and the

B black and

A color ink out lights come

on, jammed paper may be blocking movement of

the print head or you may not have removed the

yellow tape seal from the installed ink cartridge(s).

Turn off the printer, open the cover, and check

inside for any jammed paper. Then turn the printer

back on. If an ink out light remains on and the print

head moves into replacement position, replace the

ink cartridge(s) as described on page 8. If the lights

still flash and/or come on, contact your dealer or

EPSON.

P S B A

flash

When all the lights flash, your printer may have an

internal error. Make sure you removed all the

packing material as described on the unpacking

sheet in your printer box. Then turn off the printer,

wait a few seconds, and turn it on again. If the

lights still flash, contact your dealer or EPSON.

P S B A

are off

When all the lights are off, the printer is not

receiving power. Try these solutions:

❏ Make sure the printer is turned on.

❏ Turn off the printer, plug in the power cord

securely, and turn on the printer again.

❏ Make sure the outlet is operable and is not

controlled by a switch or timer. If in doubt, try

using another outlet.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Epson Stylus Color 1160 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Epson Stylus Color 1160 Manual

Product: