655253
66
Zoom out
Zoom in
Previous page
1/135
Next page
When there is lint attached to the
flushing pad
Wipe off lint and dust with the tip of a cleaning stick.
c
Important:
Do not deform the metal section of the top surface.
If they are deformed, they may damage the print
head.
If no other parts need to be cleaned, proceed to the
following section.
U “Finishing Cleaning” on page 66
Finishing Cleaning
After cleaning, close the right maintenance cover and
press the Z button.
The menus will close when the print head returns to
its normal position.
To continuously make prints, perform Nozzle Check.
U “Printing nozzle check patterns” on page 77
Disposing of used ink cleaner, cleaning stick, and
clean-room wipers U “Disposal of used
consumables” on page 75
Shaking and Replacing
Ink Cartridges
Shaking
Timing and frequency of shaking
c
Important:
Due to ink characteristics, the ink cartridges of
this printer are prone to sedimentation
(components settling to the bottom of the liquid).
If ink settles, tint unevenness and nozzle clogs occur.
Shake a new ink cartridge before installing it.
After installing it in the printer, remove and
shake it periodically.
When replacing
Remove the new cartridge from the package, and
shake thoroughly.
The number of shakes depends on the ink color.
OR, WH, MS Approx. 50 times in 15
seconds
Colors other than OR,
WH, MS
Approx. 15 times in 5
seconds
Before the start of daily print work (WH/MS only)
WH and MS tend to settle more than other colors.
Before the start of daily print work, remove the
ink cartridge, and then shake it the number of
times listed below.
Approx. 15 times in 5 seconds
If a cartridge has not been shaken for 24 hours or
more, the following message appears. If the
message appears, remove the ink cartridge
immediately, and then shake it.
Remove and shake MS/WH ink cartridge(s).
Once every three weeks (All colors excluding WH/
MS)
Even after installing an ink cartridge in the
printer, remove and shake it periodically.
Approx. 15 times in 5 seconds
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Maintenance
66
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SC-S80600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SC-S80600 in the language / languages: English as an attachment in your email.

The manual is 9,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SC-S80600

Epson SC-S80600 User Manual - Dutch - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info