655253
54
Zoom out
Zoom in
Previous page
1/135
Next page
A to D indicates the margins on all four sides. See the following for more details.
Margin Position Explanation Available
Setting Range
A Rear
*1
This can be set in RIP. To maintain media feeding accuracy, if the settings are
less than 5 mm or more than 17 mm, the settings are switched to 5 mm and
17 mm respectively.
5 to 17 mm
B Leading edge
*1
This can be set in RIP. Differs by the length the media was pulled when the
media is loaded. For continuous printing, although the margins set in RIP are
added, to maintain media feeding accuracy, if the setting is less than 5 mm
the setting is switched to 5 mm.
5 mm or more
CLeft edge
*2, *3
The value selected for Side Margin(Left) in the printer's setup menu. The
default setting is 5 mm.
3 to 25 mm
DRight edge
*2, *3
The total of the values selected for Print Start Position and Side Margin(Right)
in the printer's setup menu. The default setting for Print Start Position is 0
mm and Side Margin(Right) is 5 mm.
3 to 825 mm
*1 The set margin and the actual print results may differ depending on the RIP being used. Contact the RIP
manufacturer for more information.
*2 This may be available in the RIP depending on the RIP software being used. Contact the RIP manufacturer
for more information.
*3 Note the following points when setting margins.
Leave margins of 10 mm or more when using media edge plates. Narrower margins could result in printer printing
over the plates.
If the total of the print data width and set left and right margins exceeds the printable area, a portion of the data will
not be printed.
Note:
If the following points are not observed when Media Size Check is OFF, printing may occur outside the left and right
edges of the media. Ink used outside the edges of the media will stain the inside of the printer.
Ensure that the print data width does not exceed the loaded media width.
When media is loaded to the left of the right side reference position, align the Print Start Position setting with the
position where the media set.
U “The Printer Setup Menu” on page 98
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Basic Operations
54
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SC-S80600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SC-S80600 in the language / languages: English as an attachment in your email.

The manual is 9,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SC-S80600

Epson SC-S80600 User Manual - Dutch - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info