655254
112
Zoom out
Zoom in
Previous page
1/135
Next page
F
Pull the media to the cutter groove and use a
cutter to remove torn or creased portions.
G
Manually rewind the cut media.
H
Remove any media that remains inside the
printer.
I
Turn the printer on.
c
Important:
If the printer is left off for an extended
period, the print head will be left uncapped
and dry out, and will not print properly
when printing resumes.
Turning the printer on automatically caps
the print head.
Reload the media and resume printing.
U “Loading media” on page 26
Media slips off when printing starts
o
Is Mode 2 set in After Heater Feed, and is
the media being cut?
If media is cut at the point just after printing and
then rewound when the next print job starts, the
media may come off the pressurization roller and
printing cannot be performed.
When cutting after printing, hold down the u
button to rewind the end of the print to the cutter
groove, and then cut.
Others
Heaters Turn off or the Optional
Additional Print Drying System
Stops.
o
The pre-, platen, and after heaters will turn off if no
print job is received for some time and no error
occurs. The time before the heaters automatically
switch to OFF can be selected using the Sleep
Mode option in the setup menu. U “The Printer
Setup Menu” on page 98
The heaters will be reactivated when a print job is
received, the media loading lever is used, or another
operation involving printer hardware is performed.
An Additional Print Drying System is supplied with
the SC-S60600 Series.
The control panel display keeps
turning off.
o
Is the printer in sleep mode?
When no operations are performed on the printer
for the time set in Sleep Mode from the setup
menu, the printer enters sleep mode. The time
before entering sleep mode can be changed in the
Printer Setup menu.
U “The Printer Setup Menu” on page 98
The heaters will be reactivated and sleep mode will
end when a print job is received, the media loading
lever is used, or another operation involving printer
hardware is performed.
Forgotten password for network
setup protection
o
Contact your dealer or Epson Support.
The red light is on inside the printer.
o
This is not a failure.
The red light is a light inside the printer.
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Problem Solver
112
112


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SC-S60600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SC-S60600 in the language / languages: English as an attachment in your email.

The manual is 9,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SC-S60600

Epson SC-S60600 User Manual - Dutch - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info