655254

Epson SC-S60600 Manual

109
Zoom out
Zoom in
Previous page
1/135
Next page
o
Is Circulating ink... displayed on the screen
of the control panel?
The printer is performing auto ink circulation to
prevent spot color ink sedimentation in the print
head or tube.
If Cancel is displayed on the lower left of the screen,
press the W button to cancel ink circulation.
However, it cannot be canceled while ink circulation
is required.
U “Notes on Usage of WH/MS Ink (SC-S80600
Series)” on page 21
Test pattern does not print correctly.
o
Perform head cleaning.
The nozzles may be clogged. Print a test pattern
again after performing head cleaning.
U “Head Cleaning” on page 77
o
Has the printer been left unused for a long
time?
If the printer has not been used for a long time, the
nozzles may have dried up and have been clogged.
Steps to take when the printer has not been used
for a long time U “Notes when not using the
printer” on page 18
The prints are not what you
expected
Print quality is poor, uneven, too
light, too dark, obvious graininess,
or the tone differs.
o
Are the print head nozzles clogged?
If the nozzles are clogged, specific nozzles do not
fire ink and the print quality declines. Try printing a
test pattern.
U “Printing nozzle check patterns” on page 77
o
Perform Head Alignment.
Given that there is a slight gap between the print
head and the media, the landing sites for the
different colors of ink may be affected by humidity,
temperature, inertial forces imparted by the print
head, the direction of the print head as it moves
from right to left or left to right, or the use of two
print heads (all models except SC-S40600 Series). As
a result, the printing result may show obvious
graininess or out-of-focus characteristics.
Select Media Adjust - Head Alignment in the
media settings to adjust a print head misalignment
that occurs during printing.
U “Head Alignment” on page 49
o
Perform Feed Adjustment.
Large discrepancies in the feed amount cause
banding (horizontal banding, tint unevenness, or
stripes). Select Media Adjust - Feed Adjustment in
the media settings to make adjustment based on
the target media.
U “Feed Adjustment” on page 48
o
Are you using a genuine Epson ink cartridge?
This printer is developed for use with Epson ink
cartridges. If you use non-Epson ink cartridges,
printouts may be faint, or the color of the printed
image may be changed because the remaining ink
level is not correctly detected. Be sure to use the
correct ink cartridge.
o
Are you using an old ink cartridge?
The print quality declines when an old ink cartridge
is used. Replace the old ink cartridge with a new
one. Use all the ink in the cartridge before the date
printed on the package or within six months of
opening, whichever is sooner.
o
Are the heaters at the correct temperature?
Raise the temperature if the print results are blurred
or smudged or the ink clots. Note, however, that
raising the temperature too high can cause the
media to shrink, wrinkle, or deteriorate.
In addition, the heaters may require some time to
reach the desired temperature if the ambient
temperature is low. The heaters may also not have
the desired effect after reaching the selected
temperature if the media is too cold. Allow the
media to warm to room temperature before use.
o
Are media settings correct?
Confirm that the media settings in the software RIP
or on the printer match the media actually in use.
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Problem Solver
109
… 109 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SC-S60600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SC-S60600 in the language / languages: English as an attachment in your email.

The manual is 9,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SC-S60600

Epson SC-S60600 User Manual - Dutch - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info