675424
112
Zoom out
Zoom in
Previous page
1/143
Next page
Platen Height Error is displayed while
printing
o
Are you printing a job over the entire print
area that requires a large amount of ink?
When printing a job that requires a large amount of
ink, the printed surface may expand due to the
amount of ink and the height position sensor may be
triggered during printing even if the T-shirt has been
loaded correctly. If this happens, try placing the T-shirt
over the platen as shown in the following illustration.
If the sensor is triggered even if the T-shirt is loaded
using a frame as shown in the illustration above,
removing the frame may smooth out any creases or
slack in the printed surface and solve the problem.
Note that the following steps are necessary if you
remove the frame.
Reduce the width of the White ink in the printer's
Garment Creator software or in the RIP software,
so that the white under-base print does not
extend outside the image.
Be careful not to touch the T-shirt while printing
as it can easily move out of position.
o
Have you dried pre-treatment liquid
completely?
The print surface becomes wet and swells if the
pre-treatment liquid is not dried sufficiently before
printing, and it may trigger the height position sensor.
Check that the pre-treatment liquid is dry.
Areas not printed are stained with ink
o
Is the platen clean?
The platen's frame and the top plate may be stained.
Check the platen and clean it if necessary.
U “Clean the Platen without Grip Pad” on page 94
Even after cleaning the scale, a
cleaning message is displayed
o
Is there any dust or ink cleaner on the scale?
If dust or ink cleaner remain on the scale after wiping, a
cleaning message is displayed. Check that there is no
dust or ink cleaner remaining on the scale.
If this message appears on the LCD panel again,
contact your dealer or Epson Support.
The printer status and log are printed
over the edges of the paper
o
Are you printing with an M size (standard)
platen?
Depending on the paper size the print area may
extend beyond the edges of the paper if paper is
loaded on an optional platen. Load paper on the M
size (standard) platen, and then print.
U “Load the T-shirt (media)” on page 45
Printing is slow or stops half way
o
Is the head move direction set to
uni-directional?
Print Direction may be set to Uni-Direction (Low
Speed) in the Garment Creator software for the
printer. Try setting Print Direction to Bi-Direction
(High Speed) in the printer's Garment Creator
software.
When printing a job from the USB memory stick, Prt
Direction may be set to Uni-Directional on the
preview screen. Disable the Uni-Directional setting.
U “Printing from a USB Memory” on page 58
SC-F2100 Series User's Guide
Problem Solver
112
112


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SC-F2100 - SURECOLOR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SC-F2100 - SURECOLOR in the language / languages: English as an attachment in your email.

The manual is 5,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SC-F2100 - SURECOLOR

Epson SC-F2100 - SURECOLOR User Manual - German - 158 pages

Epson SC-F2100 - SURECOLOR User Manual - Dutch - 149 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info