675424
100
Zoom out
Zoom in
Previous page
1/143
Next page
Setting Item Setting Description
Head Alignment If print results are grainy or blurry, perform Head Alignment to realign the
print head for each platen size. Visually inspect the printed check pattern,
and then enter the adjustment value for the pattern with the least visible
lines. If there is no optimum adjustment value in the printed check pattern,
perform this setting again after entering "1" or "13". In the following
situations, changes are not reflected in the print results even if you make
adjustments using this setting.
Print Direction is set to Uni-Direction (Low Speed) in the Garment
Creator software for the printer
When printing a job from the USB memory stick, Prt Direction is set
to Uni-Directional on the preview screen
U “Correcting the print misalignment” on page 82
Offset Head Alignment
-10 to +10 (0
*
)
Use this setting if you want to print without performing Head Alignment
when you cannot adjust the height of the platen correctly because of an
uneven print surface such as a pocket. "+3" is the equivalent adjustment
value to lowering the platen height by two steps with the Platen gap
adjustment lever. Perform Head Alignment to further correct
misalignment in the image. The setting you make in this option reverts to
its default value if you perform Head Alignment.
Feed Adjustment -1.00 to +1.00
% (0.00
*
)
Use this setting to adjust the platen feed for each time the print head
moves. Specify a larger number if dark lines are appearing, and a smaller
number if faint lines are appearing.
USB File List
* Default Settings
Setting Item Setting Description
Select Print File
xxxxxxxxxxxxxxxxxxx.prn
1 to 999 (1
*
)
If the job on the connected USB memory stick is supported, the name of
the file is displayed with up to 23 single-byte characters. Select the job you
want to print and specify the number of copies.
U “Printing from a USB Memory” on page 58
Delete Print File If the job on the connected USB memory stick is supported, the name of
the file is displayed with up to 23 single-byte characters. Select the job you
want to delete.
U “Deleting” on page 59
Printer Status
Setting Item Display Value Description
Total Prints xxxxxx pages Displays the total number of prints (six figures maximum).
Firmware Version xxxxxxx,x.xx,xx
xx
Displays the printer's firmware version.
SC-F2100 Series User's Guide
Using the Control Panel Menu
100
100


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SC-F2100 - SURECOLOR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SC-F2100 - SURECOLOR in the language / languages: English as an attachment in your email.

The manual is 5,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SC-F2100 - SURECOLOR

Epson SC-F2100 - SURECOLOR User Manual - German - 158 pages

Epson SC-F2100 - SURECOLOR User Manual - Dutch - 149 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info