675424
82
Zoom out
Zoom in
Previous page
1/143
Next page
Correcting the print
misalignment
A small distance between the print head and the T-shirt
may cause ink misalignment due to the temperature,
humidity, inertial force of the print head's movements,
direction of the print head's movement (right to left and
left to right), and thickness and texture of the media. Ink
misalignment can also occur if the platen feed varies for
some reason. This may produce grainy or blurry results.
Adjust the printer to correct the misalignment.
The following two options are available for correcting
print misalignments.
Head Alignment (when there are vertical lines or
faint text)
Offset Head Alignment (when you want to fine tune
after performing Head Alignment)
Feed Adjustment (when there are horizontal lines)
This section explains how to visually check the check
pattern and use Head Alignment to perform
corrections. See the following for more details on Offset
Head Alignment and Feed Adjustment.
U “Printer Setup” on page 99
Head Alignment
Buttons that are used in the following operations
A
Load the T-shirt for which you want to perform
adjustments on the platen, and then adjust the
height by moving the platen gap adjustment
lever.
U “Load the T-shirt (media)” on page 45
Note:
The check pattern is printed at the same size as the
top surface of the platen installation plate.
B
Press the r button to display the Settings menu.
C
Press the u/d buttons to highlight Printer
Setup, and then press the r button.
D
Press the u/d buttons to select Head
Alignment, and then press the r button.
E
Press the u/d buttons to highlight the size of the
installed platen, and then press the r button.
F
Press the Z button.
G
Check that T-shirt is loaded, and then press the
Z button again.
The check pattern is printed.
When printing a head alignment check pattern
with platens other than medium grooved platen,
the range of the check pattern that is printed is
about the same size as the top surface of the
platen installation plate.
When printing with medium grooved platen, it
will be similar to the following diagram.
A: Print check pattern range
SC-F2100 Series User's Guide
Maintenance
82
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SC-F2100 - SURECOLOR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SC-F2100 - SURECOLOR in the language / languages: English as an attachment in your email.

The manual is 5,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SC-F2100 - SURECOLOR

Epson SC-F2100 - SURECOLOR User Manual - German - 158 pages

Epson SC-F2100 - SURECOLOR User Manual - Dutch - 149 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info