675424
27
Zoom out
Zoom in
Previous page
1/143
Next page
Basic Printing
Preparation
To print on a T-shirt using this printer, you need the
following devices and parts.
Prepare genuine ink cartridges, pre-treatment liquid,
and a platen for use with this printer.
U “Options and Consumable Products” on
page 114
Device for Fixating Ink
You need one of the following devices to fixate the ink
after printing. Use as required.
Heat press (commercially available)
As well as fixating the ink, this is also used to remove
creases from T-shirts before printing starts and to fixate
the pre-treatment liquid when using White ink. The
heat press needs to be larger than your platen and to be
able to sustain 170 ˚C or more for 90 seconds. We
recommend a heat press with a foam sheet or mat to
allow the steam to escape. If these are not supplied, you
need to acquire them beforehand.
Oven (commercially available)
This can only perform ink fixation. When using White
ink, make sure you use a heat press as you need to fixate
the pre-treatment liquid.
Under Normal Usage
Platen
A standard M-size platen is supplied. As well as this
M-size platen, there are five other types of platens at
different sizes available.
U “Options and Consumable Products” on
page 114
Grip Pad Tool
This is used to remove slack and creases when loading a
T-shirt on a grip pad covered platen.
T-shirts (commercially available)
We recommend using a 100% cotton, thick fabric with a
high weave density.
You can load media with a cotton blend ratio of 100% to
50%. However, we recommend making a test print in
advance since the print quality cannot always be
guaranteed for some types of fabric.
Sticky tape or a sticky roller (commercially available)
This is used to remove lint from the print surface of the
T-shirt before printing.
Hard roller (optional item or commercially available)
This is used to press the fibers flat on the print surface of
the T-shirt before printing.
When using commercially available products, make
sure you prepare a separate hard roller and
pre-treatment liquid roller.
Heat-resistant release sheet (commercially
available)
Place this over the T-shirt to prevent any pre-treatment
liquid or ink from touching the press side of the heat
press. You can also use it to load T-shirts on the grip pad
covered platen using the grip pad tool.
Prepare silicon paper, fluoro-resin sheets, and so on.
Heat-resistant fabric (commercially available)
Place this on top of and under the T-shirt when using a
heat press with a T-shirt being printed on near the
seams, such as the sleeves. We recommend using the
same type of fabric as the T-shirt.
Items for Use in Pre-treatment
(Only when Using White Ink)
This is necessary when printing using White ink. You
can attain the following results by applying
pre-treatment liquid before printing.
Develops White ink creating a more vivid color.
Improves the color development on the White ink.
SC-F2100 Series User's Guide
Basic Printing
27
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SC-F2100 - SURECOLOR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SC-F2100 - SURECOLOR in the language / languages: English as an attachment in your email.

The manual is 5,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SC-F2100 - SURECOLOR

Epson SC-F2100 - SURECOLOR User Manual - German - 158 pages

Epson SC-F2100 - SURECOLOR User Manual - Dutch - 149 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info