675424
21
Zoom out
Zoom in
Previous page
1/143
Next page
When installing ink cartridges for the first time, a
lot of ink is consumed to fill all parts of print head
nozzles to get the printer ready for printing. Be sure
to have replacement cartridges ready soon.
We recommend that ink and Cleaning cartridges be
stored at room temperature out of direct sunlight
and used before the expiry date printed on the
packaging.
To ensure print quality, we recommend that ink
and Cleaning cartridges be used up within a year of
their installation.
Ink cartridges and Cleaning cartridges that have
been stored at low temperatures for an extended
period should be allowed to return to room
temperature over a period of four hours before use.
Do not touch the IC chips on the cartridges. Doing
so may prevent normal operation and printing.
Install ink and Cleaning cartridges into all slots. The
printer cannot print unless cartridges are installed
in all slots.
Do not leave the printer without cartridges
installed. The ink in the printer may dry, preventing
it from printing as expected. Leave cartridges in all
slots even while you do not use the printer.
Information such as the remaining levels is
managed by the IC chip to allow the cartridge to be
continuously used after being removed and
re-installed.
If you remove an ink cartridge before it is empty,
wipe off any ink that is stuck on the ink supply port
using the cleaning stick in the supplied
maintenance kit. If ink dries on the supply port, it
may leak when it is reinstalled.
Make sure that the supply port is free of dust when
storing cartridges. The port does not need to be
capped since there is a valve inside.
Removed ink cartridges may have ink around the
ink supply port, so be careful not to soil the
surrounding area.
To maintain the quality of the print head, this
printer stops printing before ink cartridges are
completely expended.
Although the cartridges may contain recycled
materials, this does not affect functions or printer
performance.
Do not dismantle or remodel cartridges. You may
not be able to print properly.
Do not drop or knock cartridges against hard
objects. It may cause an ink leak.
Notes on Handling White Ink
A characteristic of White ink is that it sediments easily
(ink particles sink to the bottom of the liquid). If the ink
is used while in this state, print quality may decline or
the printer may malfunction. Note the following points
to use the printer under optimum conditions.
Remove the installed cartridge at the start of every
working day or every 20 hours (when a message is
displayed), and shake it well.
U “Shaking and Replacing Ink Cartridges” on
page 83
You need to clean the inside of the tubes when print
quality declines due to sedimentation in the ink
tubes, when there is not enough white, or the white
is uneven in print outs.
U “Tube Washing” on page 91
When storing cartridges, lay them down flat. If
cartridges are stored standing upright, you may not
be able to clear the sedimentation even by shaking
them.
If the printer is not going to be used for more than
two weeks, use the optional Cleaning cartridge to
perform prolonged storage maintenance. If the
printer is left in this condition without performing
maintenance, it may be impossible to clear clogging
in the print head.
U “Prolonged Storage” on page 77
SC-F2100 Series User's Guide
Introduction
21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SC-F2100 - SURECOLOR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SC-F2100 - SURECOLOR in the language / languages: English as an attachment in your email.

The manual is 5,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SC-F2100 - SURECOLOR

Epson SC-F2100 - SURECOLOR User Manual - German - 158 pages

Epson SC-F2100 - SURECOLOR User Manual - Dutch - 149 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info