Manual Epson powerlite 8300i (page 109 of 138) (English)

511924

109

Zoom out

Zoom in

1/138

Solving Problems 109

Solving Problems with the Remote

Control

The projector doesn’t respond to remote control commands.

■ Make sure the remote control is turned on using the switch on its

side (see page 46).

■ Make sure the remote control ID matches the ID of the projector

you want to operate (see page 48). If you don’t know the

projector ID, set the remote control ID to zero; this lets it work

with any projector.

■ If you’ve held down the pointer button for more than 10

seconds, the remote control may have gone into sleep mode.

Releasing the button restores normal operation.

■ The remote control’s batteries may not be installed correctly or

may be low on power. To change the batteries, see page 50.

■ Make sure you are within 30 feet (9 meters) of the projector, and

within range of the projector’s front or back sensor

(approximately 30° to left or right and 15° above or below).

■ Dim the room lights and turn off any fluorescents. Make sure the

projector is not in direct sunlight. Strong lighting, especially

fluorescent lights, may affect the projector’s infrared receivers.

■ Turn off any nearby equipment that emits infrared energy, such

as a radiant room heater.

You’ve connected a computer and you can’t control the

mouse pointer with the remote control.

Make sure the cable is securely connected to both your computer’s

USB port and the projector’s USB port (see page 27).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Epson powerlite 8300i in the language / languages: English as an attachment in your email.

The manual is 6,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Epson powerlite 8300i Manual

Product: