511924
24
Zoom out
Zoom in
Previous page
1/138
Next page
24 Setting Up the Projector
Connecting to the BNC Port
1. Depending on your computer’s connection, obtain the correct
type of BNC cable (these cables are commercially available):
If your computer has a VGA port, use a VGA–5BNC cable.
If your computer provides video output through BNC
connectors, use a 5BNC–5BNC cable.
2. Connect the cable to the projector’s
BNC port as shown. Connect
the red, green, and blue connectors to the corresponding
R, G,
and
B ports on the projector. Then plug the remaining two
connectors into the corresponding H/C Sync and V Sync ports.
3. Connect the other end to your computer’s video-out or monitor
port.
4. Optionally, you can connect an external monitor (see page 28),
play sound through the projector (see page 29), or connect a USB
cable to use the remote control as a mouse (see page 27).
5. If you don’t need to make any other connections, see Chapter 2
for instructions on turning on the projector and adjusting the
image. Once the projector is turned on, be sure to:
Enter the projector’s Setting menu, then make sure the BNC
Input is set to
Analog-RGB (this is the default setting; see
page 70).
After exiting the menu system, select BNC as the source to see
your image (see page 34).
note
The connectors on your cable
may be labelled, or they may
be color-coded (black for
H/C Sync and gray for
VSync).
RGB
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson powerlite 8300i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson powerlite 8300i in the language / languages: English as an attachment in your email.

The manual is 6,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info