511928
134
Zoom out
Zoom in
Previous page
1/199
Next page
134 Solving Problems
Flashing red There is a problem with the fan or temperature sensor. Stop using the
projector, disconnect the power cable, and contact Epson as described
on page 149.
Flashing
orange
Rapid cooling is in progress. Although this is not an abnormal condition,
projection will stop automatically if the temperature rises higher. Make
sure there is plenty of space around the projector for ventilation, and that
the air filter and vents are clear. If you’re using the projector above 4900
feet (1500 m), turn on High Altitude Mode; see page 117.
Red The projector is overheating, which turns the lamp off automatically.
Wait until the cooling fan stops, then unplug the power cord. Plug the
power cord back in and press the P power button. Make sure the room
temperature is not above 95 °F (35 °C), and there is plenty of space
around the projector for ventilation. If you’re using the projector above
4900 feet (1500 m), turn on High Altitude Mode; see page 117.
The air filter or vent may be clogged. Clean them or replace the air filter
as described on page 121.
If the projector continues to overheat after you clean or replace the air
filter, contact Epson for help as described on page 149.
Warning: Except as specifically explained in this User’s Guide, do not
attempt to service this product yourself.
Flashing
orange
It’s time to replace the lamp. See page 122 for instructions. If you
continue to use the lamp after the replacement warning, there is an
increased possibility that the lamp may break.
Flashing red The lamp may be burnt out. First make sure the lamp cover is securely
installed. If that’s not the problem, let the lamp cool, remove the lamp,
and check if it is cracked. If it is cracked, replace it as described on
page 122. If it not cracked, reinstall the lamp and try using it again.
The air filter or vent may be clogged. Clean them or replace the air filter
as described on page 121.
If these steps do not resolve the problem, contact Epson as described on
page 149.
Status lights (continued)
Light Status Description
134


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson Powerlite 825plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson Powerlite 825plus in the language / languages: English as an attachment in your email.

The manual is 6,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info