216107
87
Zoom out
Zoom in
Previous page
1/118
Next page
Solving Problems 87
The image contains static or noise.
If you’re using a computer cable longer than 6 feet (2 m), or an
extension cable, the image quality may be reduced.
Keep your computer and video cables separated from the power
cord as much as possible to prevent interference.
The video signal may be split between the computer and the
projector. If you notice a decline in the projected image quality
when the image is displayed simultaneously on your laptop
computer and the projector, turn off the laptop’s LCD display.
If you’re projecting from a composite or S-Video source, check
the
Video Signal setting in the Signal menu. In most cases, leave
it set at
Auto. If you’re using a 60-Hz PAL video source, change
this setting to
PAL60. Also make sure the Progressive setting is
On. See page 60 for details.
Make sure the cables are securely connected at both ends.
Select the correct resolution; see “Compatible Video Formats” on
page 106.
If you’re projecting from a computer, press the Enter/Auto
button on the remote control or the
Enter button on the
projector to adjust tracking and sync automatically. If that doesn’t
work, try adjusting the
Sync and Tracking settings in the Signal
menu. See page 59.
The image is blurry.
Adjust the focus using the focus ring. See page 40.
Try cleaning the lens as described on page 74.
Make sure the lens is not fogged by condensation. You may need
to wait before using the projector after moving it from a cold
environment.
Make sure the projection distance is within the ranges described
on page 16 through page 18.
Adjust the Sharpness setting on the Image menu (see page 58).
You should be able to see the effect on the screen immediately.
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson powerlite 410w multimedia projector at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson powerlite 410w multimedia projector in the language / languages: English as an attachment in your email.

The manual is 3,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info