655249
12
Zoom out
Zoom in
Previous page
1/139
Next page
When loading paper
Use passbooks and paper that have more than 60% reflectance.
When you use a passbook, set Passbook mode to On and set Binding mode to the method for the
passbook’s binding in the default setting mode.
Do not load passbooks that are creased or have ripped seam.
Do not use a passbook that has any metallic parts such as staplers or metal clips.
Do not use a passbook with sticky parts such as stamps or seals.
Do not use a passbook that has any pages smaller than the cover page.
Do not print on the front or back cover of a passbook. Printing can be done only when the
passbook is opened.
When you use paper that is shorter than 110.0 mm, set the paper eject direction to front. The
factory set default is front. Please access http://www.epson.com for information.
Do not insert paper that is curled or has been folded into the slot when you load it.
Do not punch holes in the area from 25.0 to 40.0 mm from the left edge of paper.
Always use the printer with the ribbon cartridge installed. Otherwise, paper jam may occur.
When operating the printer
Avoid using or storing the printer in places subject to rapid changes in temperature and humidity.
Keep it away from direct sunlight, strong light, heat sources or excessive moisture or dust.
Adjust only those controls that are covered in the user documentation. Improper adjustment of
other controls may result in damage requiring extensive repair by a qualified technician.
Whenever you turn off the printer, wait at least five seconds before turning it back on; otherwise,
you may damage the printer.
Do not turn off the printer while it is printing the self test. Always press the Offline button to stop
printing and then turn off the printer.
Do not turn off the printer while it is printing the hex dump. Always press the Offline button to
pause printing. Then turn off the printer.
Do not reconnect the power cord to an electrical outlet that has the wrong voltage for your printer.
Never replace the print head yourself; you may damage the printer. Also, other parts of the printer
must be checked when the print head is replaced.
PLQ-30/PLQ-30M User’s Guide
Safety Instructions 12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson PLQ-30M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson PLQ-30M in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson PLQ-30M

Epson PLQ-30M Quick start guide - English - 2 pages

Epson PLQ-30M User Manual - German - 144 pages

Epson PLQ-30M User Manual - Dutch - 139 pages

Epson PLQ-30M Installation Guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info