You See Only a Few Dots in Your Scanned Image
❏ Make sure the original is placed on the scanner glass with the side to be scanned facing down.
❏ In Home Mode, Oce Mode, or Professional Mode in EPSON Scan, and when Black & White is selected as
the Image Type, change the
reshold
setting. In Home Mode, click Brightness to display the adjuster.
Related Information
& “Scanning in Oce Mode” on page 28
& “Scanning in Home Mode” on page 30
& “Scanning in Professional Mode” on page 33
A Line or Line of Dots Always Appears in Your Scanned Images
❏ Clean the scanner glass and document mat. If the problem continues, the scanner glass may be scratched.
Contact your dealer for assistance.
❏ Remove any dust from the original.
Related Information
& “Cleaning the Scanner” on page 56
Straight Lines in Your Image Come Out Crooked
Make sure the original is placed perfectly straight on the scanner glass.
Related Information
& “Placing Documents or Photos” on page 15
& “Placing Large or ick Documents” on page 17
& “Placing Originals with the Scanner in a Standing Position” on page 18
Your Image Is Blurred
❏ Make sure the original is placed at on the scanner glass. Also make sure your original is not wrinkled or
warped.
❏ Make sure you do not move the original or the scanner while scanning.
❏ Make sure the scanner is placed on a at, stable surface.
❏ In Oce Mode or Professional Mode in EPSON Scan, select Unsharp Mask.
❏ Increase the resolution setting.
Related Information
& “Placing Documents or Photos” on page 15
& “Placing Large or ick Documents” on page 17
& “Placing Originals with the Scanner in a Standing Position” on page 18
& “Scanning in Oce Mode” on page 28
User's Guide
Solving Problems
70
