771287
13
Zoom out
Zoom in
Previous page
1/35
Next page
WPS push button
You can setup by pushing the WPS button on a wireless router (access point). Use this method if you have already
connected other Wi-Fi enabled devices using WPS.
For information on setting up a Wi-Fi connection using the WPS setup, click the following link. This feature is not
available for all products or may not be enabled.
html/wps_b.htm
WPS PIN code
You can setup by entering eight numbers to a wireless router (access point). The eight numbers are displayed on the
product’s LCD screen or printed on the product’s network status sheet.
For information on setting up a Wi-Fi connection using the WPS setup, click the following link. This feature is not
available for all products or may not be enabled.
html/wps_p.htm
Direct Connection
You can connect a product directly to a computer, smartphone, or tablet without a wireless router (access point). The
following methods are available depending on your product and device.
Wi-Fi Direct connection:
You can connect directly to the product by using a device that supports Wi-Fi Direct or Wi-Fi. This method uses the
WPA2-PSK(AES) security method which is the same as infrastructure mode.
“Wi-Fi Direct” on page 13
Ad Hoc connection:
You can connect directly to the product using Ad Hoc compatible devices. This method only uses the WEP security
method.
“Ad Hoc mode” on page 15
Note:
These features are not available for all products or the features may not be enabled.
Windows computers can set up a direct connection by using the installer on the software disc. If the product supports
Wi-Fi Direct, the product connects using Wi-Fi Direct.
Wi-Fi Direct
There are two connection modes for Wi-Fi Direct; an access point connection known as “Simple AP mode”, and a
peer-to-peer connection known as “Wi-Fi Direct mode”. You can switch the connection mode by using the services
settings in Web Config. For details on using Web Config, see the product’s User’s Guide.
Simple AP mode (access point connection):
In this mode, the product acts as an access point. Even if your device does not support Wi-Fi Direct, you can connect
the product to a device. When in this mode, the product’s default SSID is “DIRECT-xxxxxxxx” (where xxxxxxxx is the
product’s MAC address).
Network Guide
Using the Product over a Network
13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson Network Guide at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson Network Guide in the language / languages: English as an attachment in your email.

The manual is 0.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson Network Guide

Epson Network Guide User Manual - German - 37 pages

Epson Network Guide User Manual - Dutch - 37 pages

Epson Network Guide User Manual - French - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info