20028
33
Zoom out
Zoom in
Previous page
1/107
Next page
LX-300
Sewica
Manual
Operating
Principla
2.1.3 Paper Handling Mechanism
During normal operation, the paper is fed to the printer, advanced to the specified position, and
ejected from the printer.
These paper handling operations are performed by various paper
handling mechanisms, such as the tractors, rollers, and gears. This section describes the paper
handling mechanism for this printer.
2.1.3.1 Paper Feed Mechanisms
Cut sheets are fed by friction. Continuous paper is fed by a tractor. There are three
ways to feed
with tractors: the push tractor method, the pull tractor method, and the push-pull tractor method.
During normal operation, the printer is set up with only one tractor, which functions as either a
push or a pull tractor, depending on where it is attached on the printer. To use the push-pull
tractor feed method, an optional tractor must be attached.
There are two ways to insert paper into the printer. Cut sheets use the top entrance and continuous
paper use rear insertion.
2.1.3.2 Paper Advance Mechanism
This section describes how the friction and tractor advance mechanisms feed paper through the
printer.
The
paper advance mechanism consists of the PF motor assembly, platen,
dtiven
roller
assembly, driven roller cover, tractor assembly, knob, PF gear train, etc. The PF motor assembly
can drive the platen both forward and in reverse.
Friction Advance Method
Paper is held by the platen, the PF driven roller, and the eject roller assembly. Turning in the
direction of the black arrows, the PF motor assembly pinion gear drives the paper advance
reduction gear. The paper advance reduction gear turns the platen gear, PF driven roller, and the
platen. The platen drives the driven roller cover; then the driven roller cover drives to eject the
paper. The paper advances in the direction of white arrows. Figure 2-3 shows the friction advance
method when the paper is fed through the top paper entrance.
COVER, ROLLER, DRIVEN
,,
PAPER ADVANCE
REDUCTION GEAR
MOTOR
ASSY.,PF
ROLLE
R
,
PF,DRIVEN
PLATEN GEAR
Pinion Gear
Figure 2-3. Friction Advance Mechanism
Rev.A
2-3
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson LX300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson LX300 in the language / languages: English as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson LX300

Epson LX300 User Manual - English - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info