Manual Epson LabelWorks LW-1000P (page 2 of 2) (English)

617851

Zoom out

Zoom in

1/2

Peel o the backing

paper.

Backing paper

Install the printer driver after installing the Label Editor software.

Install the software after making the printer and access point network settings.

1. Specifying the network connection method

2. Printer and access point operations

3. Software installation

1. Installing the "Label Editor" software in the computer

2. Installing the printer driver

Using the Printer

CAUTION

Always perform the tape feed operation

after inserting a tape cartridge in the

printer.

Remove any slack in the tape inside the

tape cartridge.

Use a pen or

a pencil.

Press the button to open the top cover.

CAUTION

Always use the AC adapter

provided.

Connect the AC adapter

provided (AST1527Z1-1) to the

printer, and plug the power plug

into a power outlet.

Use the label editing software "Label Editor" to

create labels.

See the Label Editor User's Guide for the detailed

procedures.

Label Editor User’s Guide

MEMO

Epson has a variety of custom tapes available for

many dierent applications.

For more information, see the Supplies Catalog

provided with the printer.

Supplies Catalog

MEMO

If you set the tape cutting method to "Half cut", only the label

surface is cut when several labels are printed consecutively,

making it easier to peel o the labels.

See the Label Editor User's Guide for the detailed procedures.

Label Editor User’s Guide

Cutting rounded label corners

You can use the auto-trimmer to

round o label corners.

Insert the tape in the tape

insertion slot, following the

guide.

The tape is cut to form rounded

label corners.

Attach the label and rub it

rmly.

Printer Setup

Can the computer to be connected to the printer be

connected to the Internet?

Does the computer have a wireless LAN function?

Is there a broadband router or access point, and is a wireless LAN

function supported?

Connect the

printer with a USB

cable.

Printer's button does not light.

Check that the power cable is properly connected. If the

button still does

not light, contact your place of purchase or the Epson customer support

center.

Printer does not print when print operation is directed.

• If a message is displayed on your computer screen, check the message

information.

• Check that connection cables are connected properly, that the tape

cartridge is mounted properly, and that the cover is closed properly.

• Have you selected the printer to be used? Printing will not be done

properly if another printer is selected.

• Did you restart the computer after installing the printer driver? The printer

driver may not be installed correctly if the computer was not restarted.

Reinstall the printer driver.

Text is not printed properly.

• Check that the tape cartridge is properly mounted.

• Print at a low speed. Change the setting in the printer settings of the

printer driver.

Lines appear on printed labels.

The print head is dirty. Clean the print head.

Canceling a print job

Check the printer's power in ON, then press the

button on the front of

the printer briey once.

Labels are not cut automatically

• Check if the cut setting is set to “Don’t cut” in the printer settings of the

Label Editor software.

Label Editor User’s Guide

• Is the cutter blade worn? Prolonged use of the cutter can wear down and

blunt the blade. Contact the Epson customer support center.

Half cut function doesn't work properly.

• Is the printer set to "Half cut" or "Don't cut"? Check the settings.

• Is the cutter blade worn? Prolonged use of the cutter can wear down and

blunt the blade. Contact the Epson customer support center.

Trimmer doesn't cut properly.

• Is the printer printing? The trimmer doesn't operate during printing.

• Was the label inserted properly in the trimmer tape insertion slot? Insert

the label into the slot following the guide.

• Is the printer clogged with tape scraps? Remove the trimmer cover, and

remove the tape scraps.

• Are you using 6 millimeter-wide tape? You cannot cut 6 millimeter-wide

tape with the trimmer.

• Is the cutter blade worn? Prolonged use of the cutter can wear down and

blunt the blade. Contact the Epson customer support center.

This section describes how to resolve printer operation and label printing problems.

See the Network Conguration Guide for how to deal with network settings or

connection problems.

Troubleshooting

The printer supports wireless LAN connection, wired LAN connection and USB

cable connection.

The connection method will vary according to the environment it is installed in.

Use the owchart below to carry out the connection procedure.

Connect the printer on a Wireless

LAN (Infrastructure Mode).

Does the access point have a WPS

button?

Use the push button auto-

connection function to set the

connection.

Network Conguration

Guide "Setting up a wireless

LAN connection (Simple AP

Mode)"

Network Conguration Guide

"Wireless LAN settings using a

PIN code (when automatically

acquiring the IP address from the

printer)", "Setting the IP address for

the printer manually"

Network Conguration Guide "Conguring

settings for a wired LAN connection"

CAUTION

Do not connect connection cables to the printer until you are instructed to do so.

USB Cable Connection to Computer

Creating a Label

Wireless LAN Connection to Computer

1. Connecting the power

cable

2. Inserting the tape cartridge in the printer

1. Creating a label

Printing operations are done from the computer

connected to the printer.

See the Label Editor User's Guide for the detailed

procedures.

Label Editor User’s Guide

2. Printing a label

3. Attaching a label

Start

This section describes all the procedures from printer setup to printing and attaching a label.

The descriptions of computer connection and other procedures are for Windows.

If using the Mac OS X operating system, refer to the "Label Editor Lite for Macintosh User's Guide."

MEMO

Wireless LAN connection, wired LAN connection and USB

connection can be used at the same time in any combination.

Place a tape cartridge in the printer as

shown.

Pass the end of the tape

through the gap.

Close the top cover.

Perform the tape feed operation.

1) Press the

button to turn the printer

power ON.

2) Press the

button.

Connect the printer on a

Wireless LAN (Simple AP

Mode).

Use one of the following methods

to set the connection:

• Use a PIN code to set the connection

• Set the connection manually

If a LAN cable is connected to the computer, a wired LAN

connection can be used.

Determining the computer connection method

Insert the DVD-ROM provided in the DVD-ROM

drive of the computer to be connected.

1. Select the

language to use.

The "License Agreement" screen appears. Read the

information, then click "Agree".

Perform the operations described in the on-screen

instructions.

When the installation completion message

appears, click "Finish".

Application software installation is now completed.

2. Click

1. Click

1. Select

2. Click

1. Select

2. Click

1. Select

2. Click

1. Turn the printer power ON.

2. Connect the computer and printer with the USB

cable.

When the installation completion screen appears,

click "Finish".

The setup procedure is now completed.

Start the Label Editor software to create a label.

MEMO

The procedure given here applies when making

the printer's network settings for the rst time.

If you have already made the network settings,

see the Network Conguration Guide.

Insert the DVD-ROM provided in the DVD-ROM

drive of the computer to be connected.

1. Select the

language to use.

The "License Agreement" screen appears. Read

the information, then click "Agree".

Install the Network Conguration Tool if needed.

10.

1. Turn the printer power ON as directed in

the on-screen instructions.

2. Press the

button until the lamp

ashes.

Press the printer’s button as directed

in the on-screen instructions.

Press the WPS button for the access point as

directed in the on-screen instructions.

The settings have been made when the printer’s

lamp stops ashing and lights steadily. The

settings information is saved in the printer.

When the installation completion screen

appears, click "Finish".

The setup procedure is now completed.

Start the Label Editor software to create a

label.

1. Click

1. Select

Next, install the printer driver. Go to Procedure

Next, make the printer and access point

settings. Go to Procedure .

Next, install the software in the computer.

Go to Procedure .

2. Click

3. Click

1. Click

1. Select

2. Click

1. Select

2. Click

Auto power-o

The printer's power turns o

automatically when the printer has not

been used for about 8 hours.

Yes

1. Select

2. Click

1. Select

2. Click

1. Select

2. Click

1. Select

2. Click

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Epson LabelWorks LW-1000P in the language / languages: English as an attachment in your email.

The manual is 4,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson LabelWorks LW-1000P

Epson LabelWorks LW-1000P Installation Guide - German - 2 pages

Epson LabelWorks LW-1000P Installation Guide - Dutch - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Epson LabelWorks LW-1000P Manual

Product: